Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Remo 12ga Bore rifle project...Inputs needed!!

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Paradox and Bore Guns

Birdhunter50
.375 member

Reged: 03/06/07
Posts: 815
Loc: Iowa,U.S.A.

Re: Remo 12ga Bore rifle project...Inputs needed!!
18/05/15 01:59 AM

Z375,
Any hone that will fit down the barrel will work, the rougher the grit the faster it will cut of course. I would start with a rougher grit and finish up with a finer one. the ones I used are made by Plews and are marked 72-309 1 1/8' medium grit. The 1 1/8 " is the maximum they will expand out to. I used hone in conjunction with these stones and you want to get a slurry going which will also help to smooth the tops of the lands up. Run the drill at a slower speed to start with at a right hand twist, you can back off on the pressure and speed up the drill after you get some of the roughness off. Most of these hones have a knurled nut that increases or decreases the pressure setting on the honing stones. Start heavy but finish up with light pressure. good luck. Bob

Post Extras

Entire topic
Subject	Posted by	Posted on
Remo 12ga Bore rifle project...Inputs needed!!	z375	16/04/15 06:23 PM
Re: Remo 12ga Bore rifle project...Inputs needed!!	DarylS	17/04/15 12:52 AM
Re: Remo 12ga Bore rifle project...Inputs needed!!	z375	17/04/15 02:55 PM
Re: Remo 12ga Bore rifle project...Inputs needed!!	DarylS	18/04/15 01:17 AM
Re: Remo 12ga Bore rifle project...Inputs needed!!	tinker	17/04/15 01:38 AM
Re: Remo 12ga Bore rifle project...Inputs needed!!	John303	17/04/15 04:33 AM
Re: Remo 12ga Bore rifle project...Inputs needed!!	z375	21/04/15 07:33 PM
Re: Remo 12ga Bore rifle project...Inputs needed!!	Birdhunter50	21/04/15 10:23 PM
Re: Remo 12ga Bore rifle project...Inputs needed!!	z375	22/04/15 09:46 PM
Re: Remo 12ga Bore rifle project...Inputs needed!!	Birdhunter50	03/07/15 10:22 PM
Re: Remo 12ga Bore rifle project...Inputs needed!!	John303	04/07/15 04:35 AM
Re: Remo 12ga Bore rifle project...Inputs needed!!	Birdhunter50	18/05/15 01:59 AM
Re: Remo 12ga Bore rifle project...Inputs needed!!	Tom_H	24/04/15 09:09 AM

Extra information

0 registered and 8 anonymous users are browsing this forum.

Moderator: tinker

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 7309

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact