Home | Ezine | Forums | Links | Contact
NitroExpress.com: Anyone run into this problem?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

Benchshooter
.224 member


Reged: 07/03/15
Posts: 11
Loc: Ohio
Re: Anyone run into this problem?
      01/05/15 03:16 AM

I had a chance to go out to the rifle range yesterday to test out a few of my 505 Gibbs loads. Out of 19, I had 3 or 4 hang fires (all using the H4831SC powder)along with 4 dented necks as seen in the picture below. I've seen this on the case bodies before but never on the necks. Two of the dented necks were using IMR4831 and the other two were from H4831SC.I chronographed the loads and came up with one string that was 2021, 2036 and 1710fps.(the latter being one of hangfires. Though the IMR powder seemed to work out better than the Hodgdons, it still doesn't explain the neck dents from both powders. I'm beginning to think that it is a primer problem. When I first primed a few cases, I didn't have a large enough head for my hand priming tool for this big of case so I had to use the RCBS rock chucker primer attachment and found that I had to bang the handle a few times to seat the primers because they protruded a little. I may have crushed the primer anvil on a few of them. I finally received my new tool head and the primers seated easy.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Anyone run into this problem? Benchshooter 02/04/15 05:18 AM
. * * Re: Anyone run into this problem? Birdhunter50   21/04/15 10:36 PM
. * * Re: Anyone run into this problem? albertan   21/04/15 11:21 PM
. * * Re: Anyone run into this problem? Benchshooter   22/04/15 05:23 AM
. * * Re: Anyone run into this problem? albertan   22/04/15 04:34 PM
. * * Re: Anyone run into this problem? Benchshooter   23/04/15 04:07 AM
. * * Re: Anyone run into this problem? albertan   23/04/15 07:01 AM
. * * Re: Anyone run into this problem? Benchshooter   01/05/15 03:16 AM
. * * Re: Anyone run into this problem? Ash   01/05/15 06:09 PM
. * * Re: Anyone run into this problem? DarylS   02/05/15 12:21 AM
. * * Re: Anyone run into this problem? Benchshooter   02/05/15 05:12 AM
. * * Re: Anyone run into this problem? chuck375   05/05/15 12:01 PM
. * * Re: Anyone run into this problem? albertan   07/05/15 12:32 PM
. * * Re: Anyone run into this problem? DarylS   08/05/15 01:33 AM
. * * Re: Anyone run into this problem? albertan   19/05/15 02:29 PM
. * * Re: Anyone run into this problem? Benchshooter   22/05/15 10:06 AM
. * * Re: Anyone run into this problem? Rule303   22/05/15 04:30 PM
. * * Re: Anyone run into this problem? DarylS   03/05/15 12:53 AM
. * * Re: Anyone run into this problem? Marrakai   03/05/15 10:49 AM
. * * Re: Anyone run into this problem? Benchshooter   04/05/15 01:53 AM
. * * Re: Anyone run into this problem? DarylS   02/04/15 01:51 PM
. * * Re: Anyone run into this problem? Benchshooter   02/04/15 09:22 PM
. * * Re: Anyone run into this problem? mauserand9mm   02/04/15 09:25 PM
. * * Re: Anyone run into this problem? DoubleD   02/04/15 11:24 PM
. * * Re: Anyone run into this problem? DarylS   03/04/15 01:55 AM
. * * Re: Anyone run into this problem? Benchshooter   03/04/15 03:00 AM
. * * Re: Anyone run into this problem? mauserand9mm   03/04/15 05:26 PM
. * * Re: Anyone run into this problem? albertan   19/04/15 11:25 PM
. * * Re: Anyone run into this problem? Benchshooter   21/04/15 10:00 AM
. * * Re: Anyone run into this problem? albertan   21/04/15 03:35 PM
. * * Re: Anyone run into this problem? albertan   21/04/15 04:20 PM
. * * Re: Anyone run into this problem? Benchshooter   21/04/15 09:01 PM
. * * Re: Anyone run into this problem? eagle27   21/04/15 04:59 PM
. * * Re: Anyone run into this problem? mauserand9mm   02/04/15 09:21 PM

Extra information
1 registered and 137 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 19611

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved