Home | Ezine | Forums | Links | Contact
NitroExpress.com: making 6,5x53R brass

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

Marrakai
.416 member


Reged: 09/01/03
Posts: 3591
Loc: Darwin, Top End of Australia
Re: making 6,5x53R brass
      29/04/15 11:45 PM

Cases made from .303 will be just a few thou wider across the rim, which doesn't matter a hoot in the rifle action or chamber, but in my experience will eventually slacken the charger clips to the point where they require constant bending and never seem to be quite right thereafter.

Having said that, its what I use in mine, with perseverance, and a little cussing occasionally...
Just doesn't seem worth it to turn a couple of thou off each rim.

--------------------
Marrakai
When the bull drops, the bullshit stops!
--------------------------------
www.marrakai-adventure.com.au

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* making 6,5x53R brass lancaster 27/04/15 10:28 PM
. * * Re: making 6,5x53R brass DarylS   28/04/15 12:58 AM
. * * Re: making 6,5x53R brass Huvius   28/04/15 04:22 AM
. * * Re: making 6,5x53R brass lancaster   28/04/15 05:25 AM
. * * Re: making 6,5x53R brass 93x64mm   28/04/15 06:04 AM
. * * Re: making 6,5x53R brass Waidmannsheil   28/04/15 06:11 AM
. * * Re: making 6,5x53R brass Ash   28/04/15 06:50 AM
. * * Re: making 6,5x53R brass lancaster   29/04/15 12:46 AM
. * * Re: making 6,5x53R brass Carpetsahib   30/04/15 04:24 AM
. * * Re: making 6,5x53R brass Ireload2   01/05/15 03:53 PM
. * * Re: making 6,5x53R brass lancaster   02/05/15 09:28 PM
. * * Re: making 6,5x53R brass Sarg   03/05/15 07:47 AM
. * * Re: making 6,5x53R brass lancaster   03/05/15 12:58 PM
. * * Re: making 6,5x53R brass Sarg   29/04/15 06:24 AM
. * * Re: making 6,5x53R brass Marrakai   29/04/15 11:45 PM

Extra information
0 registered and 153 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 12884

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved