Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: A 400 Lee Speed.

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Lee Speed Forum & Archive

VonGruff
.400 member

Reged: 08/02/09
Posts: 1119
Loc: South Otago, New Zealand.

Re: A 400 Lee Speed.
28/04/15 08:43 AM

About this time it was apparent I would need a front sight so A Lee Enfield military sight looked like it would do the job with a little work

The part I couldn't do myself was to open up the inside of the band. I don't have a lathe (or a mill) so it was down to the local garage where he has a small lathe and he opened it up for me.
The locating lug recess's were almost completely removed so there was no visible remainder when I tapped it onto the barrel.
I went and fired a few shots and with the aperture sight at the lowest setting where I wanted it to be, the shots hit 22 1/2 inches low at 50 yds. With a 31in sighting radius, I needed to lower the front sight by .3875 and if I filed the ramp down and cut a new dovetail that would have cut through the hole at the top of the band that was there for locating purposes, and would have dramatically weakened the hold on the divetail. This led me to file the ramp down and split it lengthwise deep enough to take a blade I made from a piece of .125 thick steel. (just a square I cut from a piece of 3x2 box steel) The blades for the LE sights are only .05 thick and my eyes can not see them clearly enough as they fuzz up badly but I have found that the thicker blade is a usable sight and I have split more of these blades and fit them over the thin blades on some of my other open sighted rifles.
The sight was over about .785 from the band to the top of the blade as the LE offering and when I got it "sorted" with the new blade so it would print on aim it was down to .306

I did start with plenty of blade height

This will do

Edited by VonGruff (28/04/15 09:06 AM)

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
A 400 Lee Speed.	VonGruff	17/02/15 05:07 PM
Re: A 400 Lee Speed.	VonGruff	17/02/15 05:08 PM
Re: A 400 Lee Speed.	VonGruff	17/02/15 05:11 PM
Re: A 400 Lee Speed.	VonGruff	17/02/15 05:14 PM
Re: A 400 Lee Speed.	VonGruff	17/02/15 05:27 PM
Re: A 400 Lee Speed.	VonGruff	17/02/15 05:34 PM
Re: A 400 Lee Speed.	VonGruff	17/02/15 05:37 PM
Re: A 400 Lee Speed.	VonGruff	17/02/15 05:41 PM
Re: A 400 Lee Speed.	VonGruff	17/02/15 05:42 PM
Re: A 400 Lee Speed.	VonGruff	17/02/15 05:44 PM
Re: A 400 Lee Speed.	VonGruff	17/02/15 05:47 PM
Re: A 400 Lee Speed.	VonGruff	17/02/15 06:03 PM
Re: A 400 Lee Speed.	VonGruff	17/02/15 06:08 PM
Re: A 400 Lee Speed.	VonGruff	17/02/15 06:54 PM
Re: A 400 Lee Speed.	VonGruff	17/02/15 07:18 PM
Re: A 400 Lee Speed.	VonGruff	17/02/15 07:20 PM
Re: A 400 Lee Speed.	VonGruff	17/02/15 07:22 PM
Re: A 400 Lee Speed.	stug	17/02/15 07:28 PM
Re: A 400 Lee Speed.	Waidmannsheil	17/02/15 08:15 PM
Re: A 400 Lee Speed.	Norman4	18/02/15 02:43 AM
Re: A 400 Lee Speed.	Caprivi	18/02/15 11:50 AM
Re: A 400 Lee Speed.	Iowa_303s	18/02/15 01:41 PM
Re: A 400 Lee Speed.	Norman4	19/02/15 09:57 AM
Re: A 400 Lee Speed.	DarylS	19/02/15 10:42 AM
Re: A 400 Lee Speed.	gwh	22/06/15 09:49 PM
Re: A 400 Lee Speed.	VonGruff	02/03/15 09:37 AM
Re: A 400 Lee Speed.	VonGruff	08/03/15 12:11 PM
Re: A 400 Lee Speed.	VonGruff	08/03/15 02:27 PM
Re: A 400 Lee Speed.	VonGruff	08/03/15 04:39 PM
Re: A 400 Lee Speed.	VonGruff	09/03/15 03:44 PM
Re: A 400 Lee Speed.	VonGruff	09/03/15 03:45 PM
Re: A 400 Lee Speed.	Ash	27/04/15 04:19 PM
Re: A 400 Lee Speed.	VonGruff	28/04/15 07:33 AM
Re: A 400 Lee Speed.	Sarg	29/04/15 06:41 AM
Re: A 400 Lee Speed.	lancaster	01/05/15 02:22 PM
Re: A 400 Lee Speed.	Pretorius	22/06/15 08:50 AM
Re: A 400 Lee Speed.	VonGruff	23/06/15 11:12 AM
Re: A 400 Lee Speed.	DarylS	23/06/15 12:01 PM
Re: A 400 Lee Speed.	VonGruff	23/06/15 12:50 PM
Re: A 400 Lee Speed.	BillG500	23/06/15 02:43 PM
Re: A 400 Lee Speed.	VonGruff	23/06/15 05:19 PM
Re: A 400 Lee Speed.	93x64mm	23/06/15 05:29 PM
Re: A 400 Lee Speed.	VonGruff	23/06/15 05:32 PM
Re: A 400 Lee Speed.	VonGruff	23/06/15 11:20 AM
Re: A 400 Lee Speed.	Viking338	22/06/15 10:48 AM
Re: A 400 Lee Speed.	Old_Glass	22/06/15 02:57 PM
Re: A 400 Lee Speed.	BillG500	22/06/15 06:29 PM
Re: A 400 Lee Speed.	VonGruff	28/04/15 07:43 AM
Re: A 400 Lee Speed.	VonGruff	28/04/15 08:03 AM
Re: A 400 Lee Speed.	VonGruff	28/04/15 08:43 AM
Re: A 400 Lee Speed.	VonGruff	28/04/15 08:52 AM
Re: A 400 Lee Speed.	CHAPUISARMES	28/04/15 09:04 AM
Re: A 400 Lee Speed.	Bidgee	28/04/15 10:48 AM
Re: A 400 Lee Speed.	VonGruff	28/04/15 11:22 AM
Re: A 400 Lee Speed.	Iowa_303s	28/04/15 01:42 PM
Re: A 400 Lee Speed.	stug	28/04/15 02:28 PM
Re: A 400 Lee Speed.	DarylS	29/04/15 01:03 AM
Re: A 400 Lee Speed.	93x64mm	29/04/15 06:18 AM
Re: A 400 Lee Speed.	VonGruff	28/04/15 08:56 AM
Re: A 400 Lee Speed.	CarlsenHighway	17/02/15 08:13 PM

Extra information

0 registered and 54 anonymous users are browsing this forum.

Moderator: NitroX

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 34682

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved