Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Joining a SXS

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing

Birdhunter50
.375 member

Reged: 03/06/07
Posts: 815
Loc: Iowa,U.S.A.

Re: Joining a SXS
27/03/15 10:52 AM

I use Hi-Force 44 from Brownells for joining barrels to the monoblock and also to solder the spacers and the ribs. It makes the whole barrel assembly much stronger. It is 4% silver and 96% Tin and it melts at 475 degrees F. It will give you 28,000 pounds of tensile strength when properly fitted and applied. That's all that is needed except for clean joint sweating. Good Luck.
Bob

Post Extras

Entire topic
Subject	Posted by	Posted on
Joining a SXS	Longknife	27/03/15 06:16 AM
Re: Joining a SXS	Birdhunter50	27/03/15 10:52 AM
Re: Joining a SXS	CowboyCS	27/03/15 03:06 PM
Re: Joining a SXS	Longknife	28/03/15 10:55 AM
Re: Joining a SXS	Ron_Vella	28/03/15 11:40 AM
Re: Joining a SXS	DarylS	29/03/15 03:12 AM
Re: Joining a SXS	Chavez	10/04/15 07:34 AM
Re: Joining a SXS	DarylS	27/03/15 08:29 AM
Re: Joining a SXS	AkMike	27/03/15 08:41 AM
Re: Joining a SXS	DarylS	27/03/15 08:57 AM
Re: Joining a SXS	Marrakai	27/03/15 09:26 AM

Extra information

0 registered and 17 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 3236

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact