Home | Ezine | Forums | Links | Contact
NitroExpress.com: Query on Rejointing Over and Unders & the Draw

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing

Shotgunlover
.224 member


Reged: 24/08/13
Posts: 45
Loc: Greece
Re: Query on Rejointing Over and Unders & the Draw
      23/03/15 04:03 AM

Interesting question!

From experience with shotguns I can tell you that once the cross pin is enlarged and the barrels pushed back there is not provision for refitting on the circle. Which kind of casts doubt on the initial benefit of that process in the new SXS.

Double rifles may be different.

In OUs it depends on the type of lock up, whether it is the Merkel or Browning underbolt or the Boss type. On some Boss type actions there are prefitted contact points that can be replace to maintain the contact between barrel lugs and action body, such as the high end Rusian MCs, the Beretta SO and others. On the Merkel types there spce for building up the front of the bites to maintain contact.

Also worth mentioning is the French Sagittaire that does OK in calibers that include the 8mm with no side lugs at all. The barrels are held solely by the cross pins and the bifurcated bolt.

--------------------
Shotgunlover

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Query on Rejointing Over and Unders & the Draw Matabele 18/03/15 08:34 PM
. * * Re: Query on Rejointing Over and Unders & the Draw Shotgunlover   23/03/15 04:03 AM
. * * Re: Query on Rejointing Over and Unders & the Draw Matabele   24/03/15 04:57 PM

Extra information
0 registered and 26 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 1119

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved