Home | Ezine | Forums | Links | Contact
NitroExpress.com: 7x54mm & 7.63x54mm M-S Chamberings

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

kuduae
.400 member


Reged: 13/01/10
Posts: 1776
Loc: middle of Germany
Re: 7x54mm & 7.63x54mm M-S Chamberings
      21/03/15 10:21 PM

Xausa, both lancaster and Fuhrmann are right. On the Schmidt & Habermann Mod.21 there is a latch built into the cocking piece knob used as a half-cock safety. here are the parts of such a latch:

This is such an action on full cock:

Here it is with the firing pin all the way forward:

To put the action on "safe" you grab the knob with your left hand, pressing the rear end of the latch in. Pull the trigger and let the firing pin slide forward until the swung out front of the latch rests against the bolt sleeve. The rifle is now safe, with the firing pin off the primer:

To put the rifle on "fire" again, either pull the cocking piece knob back to full cock again, or lift and lower the bolt handle.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* 7x54mm & 7.63x54mm M-S Chamberings fsrmg1 12/06/14 11:25 AM
. * * Re: 7x54mm & 7.63x54mm M-S Chamberings 7mmSAKO   24/02/15 05:04 AM
. * * Re: 7x54mm & 7.63x54mm M-S Chamberings DonZ   24/02/15 01:17 PM
. * * Re: 7x54mm & 7.63x54mm M-S Chamberings 7mmSAKO   24/02/15 04:32 PM
. * * Re: 7x54mm & 7.63x54mm M-S Chamberings lancaster   21/03/15 03:35 AM
. * * Re: 7x54mm & 7.63x54mm M-S Chamberings fuhrmann   21/03/15 06:11 AM
. * * Re: 7x54mm & 7.63x54mm M-S Chamberings xausa   21/03/15 08:12 AM
. * * Re: 7x54mm & 7.63x54mm M-S Chamberings lancaster   21/03/15 02:47 PM
. * * Re: 7x54mm & 7.63x54mm M-S Chamberings 93x64mm   21/03/15 04:28 PM
. * * Re: 7x54mm & 7.63x54mm M-S Chamberings fuhrmann   21/03/15 07:36 PM
. * * Re: 7x54mm & 7.63x54mm M-S Chamberings lancaster   21/03/15 07:51 PM
. * * Re: 7x54mm & 7.63x54mm M-S Chamberings kuduae   21/03/15 10:21 PM
. * * Re: 7x54mm & 7.63x54mm M-S Chamberings lancaster   21/03/15 10:31 PM
. * * Re: 7x54mm & 7.63x54mm M-S Chamberings kuduae   22/03/15 06:26 AM
. * * Re: 7x54mm & 7.63x54mm M-S Chamberings fuhrmann   21/03/15 07:10 PM
. * * Re: 7x54mm & 7.63x54mm M-S Chamberings lancaster   21/03/15 07:06 PM
. * * Re: 7x54mm & 7.63x54mm M-S Chamberings Igorrock   12/06/14 02:04 PM
. * * Re: 7x54mm & 7.63x54mm M-S Chamberings fsrmg1   12/06/14 03:14 PM
. * * Re: 7x54mm & 7.63x54mm M-S Chamberings fuhrmann   12/06/14 06:08 PM
. * * Re: 7x54mm and 7.63x54mm M-S Chamberings fsrmg1   13/06/14 12:51 AM
. * * Re: 7x54mm and 7.63x54mm M-S Chamberings Igorrock   13/06/14 01:18 AM
. * * Re: 7x54mm and 7.63x54mm M-S Chamberings fsrmg1   13/06/14 10:15 AM
. * * Re: 7x54mm and 7.63x54mm M-S Chamberings Igorrock   13/06/14 03:24 PM
. * * Re: 7x54mm and 7.63x54mm M-S Chamberings fsrmg1   13/06/14 06:42 PM
. * * Re: 7x54mm and 7.63x54mm M-S Chamberings fuhrmann   15/06/14 03:05 AM
. * * Re: 7x54mm and 7.63x54mm M-S Chamberings Igorrock   15/06/14 04:28 AM

Extra information
0 registered and 50 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 10633

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved