Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Mauser in 9X57

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

xausa
.400 member

Reged: 07/03/07
Posts: 2037
Loc: Tennessee, USA

Re: Mauser in 9X57
19/03/15 03:21 AM

To be sure of forming brass with correct headspace, you could either simply size the brass in your 9X57 dies and load the bullets far enough out to engage the lands, or go one step farther in the loading process and neck the cases up to .40 caliber, then neck one down with the 9X57 dies by leaving the full length die about .025" above the shell holder and gradually screwing it in, attempting to close the bolt on the sized case after each adjustment, until the case is a crush fit in the chamber. Then, leaving the full length sizing die locked in at that position, size the rest of your cases.

Either method will insure that the case head is held firmly against the bolt face and is not moved forward by the firing pin fall.

Post Extras

Entire topic
Subject	Posted by	Posted on
Mauser in 9X57	Alaskanrocket	17/03/15 06:02 AM
Re: Mauser in 9X57	Alaskanrocket	18/03/15 03:52 AM
Re: Mauser in 9X57	lancaster	18/03/15 05:25 AM
Re: Mauser in 9X57	Alaskanrocket	18/03/15 06:23 AM
Re: Mauser in 9X57	Huvius	18/03/15 12:47 PM
Re: Mauser in 9X57	lancaster	18/03/15 04:01 PM
Re: Mauser in 9X57	Alaskanrocket	18/03/15 04:20 PM
Re: Mauser in 9X57	lancaster	19/03/15 05:01 AM
Re: Mauser in 9X57	Rohermoker	22/03/15 02:46 AM
Re: Mauser in 9X57	xausa	19/03/15 03:21 AM
Re: Mauser in 9X57	Alaskanrocket	19/03/15 04:11 AM

Extra information

0 registered and 102 anonymous users are browsing this forum.

Moderator: NitroX

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 4180

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact