Home | Ezine | Forums | Links | Contact
NitroExpress.com: 9.3 mould questions

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Cast Bullets
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

DarylSModerator
.700 member


Reged: 10/08/05
Posts: 27006
Loc: Beautiful British Columbia, Ca...
Re: 9.3 mould questions
      31/01/15 11:05 AM

That's the same size as my 9.3x57 was, Matt- .370" groove diameter. The bore was a standard .358".

The neck in my chamber would only allow a .367" bullet seated in an 8x57 RP necked up case, though. It was fine for .365" to .367" jacketed bullets and very accurate with those, but would need to be enlarged by .005" to allow larger bullet to be used, to .397"- just a guess.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* 9.3 mould questions Jim_C 15/12/14 02:00 PM
. * * Re: 9.3 mould questions DarylSModerator   15/12/14 06:39 PM
. * * Re: 9.3 mould questions aromakr   16/12/14 01:45 AM
. * * Re: 9.3 mould questions Jim_C   16/12/14 03:36 PM
. * * Re: 9.3 mould questions DarylSModerator   17/12/14 03:05 AM
. * * Re: 9.3 mould questions wjw   17/12/14 03:16 PM
. * * Re: 9.3 mould questions DarylSModerator   18/12/14 02:18 AM
. * * Re: 9.3 mould questions Jim_C   18/12/14 04:59 AM
. * * Re: 9.3 mould questions cordite   20/12/14 02:24 PM
. * * Re: 9.3 mould questions CptCurlAdministrator   30/01/15 11:27 PM
. * * Re: 9.3 mould questions aromakr   31/01/15 01:56 AM
. * * Re: 9.3 mould questions Iowa_303s   31/01/15 10:42 AM
. * * Re: 9.3 mould questions DarylSModerator   31/01/15 11:05 AM
. * * Re: 9.3 mould questions Iowa_303s   31/01/15 11:27 AM
. * * Re: 9.3 mould questions DarylSModerator   01/02/15 06:04 AM
. * * Re: 9.3 mould questions Iowa_303s   01/02/15 07:25 AM
. * * Re: 9.3 mould questions DarylSModerator   01/02/15 07:35 AM
. * * Re: 9.3 mould questions eagleyes   31/01/15 11:59 AM
. * * Re: 9.3 mould questions Jim_C   31/01/15 05:20 PM
. * * Re: 9.3 mould questions xausa   18/12/14 01:34 AM

Extra information
0 registered and 48 anonymous users are browsing this forum.

Moderator:  DarylS 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 8357

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved