Home | Ezine | Forums | Links | Contact
NitroExpress.com: Lancaster oval bore muzzleloader

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifle Photos & Archive
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

DarylS
.700 member


Reged: 10/08/05
Posts: 26994
Loc: Beautiful British Columbia, Ca...
Re: Lancaster oval bore muzzleloader
      04/01/15 04:11 AM

Sissor-type moulds with sprue cuttoffs usually had them on the handle end of the hinge pin of the mould handles.

The rifling twist will dictate how long you can make the 'sprue'.
Attaching wads to it, might be a good idea - or not. Testing will tell that story.
Still looks like a 'typical' American picket-type bullet to me.

Yes- the addition of wads would help centre the bullet.
What is the diameter of the inside cavity of the mould? Subtract about .002" for actual bullet size in soft lead, which is probably correct for the gun. Hardened lead makes loading more difficult to impossible in a muzzleloader and will eliminate the bullet's ability to obturate to help seal the bore.

The sprue cutters normally cut the sprue off square with the base or nose of the bullet.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Lancaster oval bore muzzleloader underlever 02/01/15 12:33 PM
. * * Re: Lancaster oval bore muzzleloader TH44   02/01/15 01:21 PM
. * * Re: Lancaster oval bore muzzleloader CptCurlAdministrator   02/01/15 11:39 PM
. * * Re: Lancaster oval bore muzzleloader Huvius   03/01/15 03:21 AM
. * * Re: Lancaster oval bore muzzleloader LesLeeSpeed   03/01/15 09:46 AM
. * * Re: Lancaster oval bore muzzleloader Huvius   03/01/15 11:30 AM
. * * Re: Lancaster oval bore muzzleloader rglenz   03/01/15 12:09 PM
. * * Re: Lancaster oval bore muzzleloader Huvius   03/01/15 06:40 PM
. * * Re: Lancaster oval bore muzzleloader DarylS   04/01/15 04:11 AM
. * * Re: Lancaster oval bore muzzleloader weimar   26/04/15 10:35 PM
. * * Re: Lancaster oval bore muzzleloader DarylS   03/01/15 10:32 AM
. * * Re: Lancaster oval bore muzzleloader tinker   02/01/15 01:04 PM

Extra information
0 registered and 64 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 5850

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved