Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Thomas Turner .450 2 3/4" BPE return to service

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing

ChrisPer
.300 member

Reged: 12/05/08
Posts: 235
Loc: Australia

Re: Thomas Turner .450 2 3/4" BPE return to service
19/12/14 09:05 AM

Thanks for that on the grip Tinker. I found I started for full wrap and found the sight plane is very low, so this is where I ended up. The first time out the barrels pulled up out of my grip so I think this time I was gripping very hard to prevent that. Will try further forward and lift a few weights first.

The loads with unburnt powder are not with any filler, and the necks are not especially tight. I have modified a Lee 45/70 crimp die but it needs some more work. I will improve that for next set of loads.

This target finished the loads Vic did for me. The jacketed bullets I have next are 300gn HP from The Bullet Factory, which have very thin non-bonded jackets suited for light-skinned Australian game. You could garage a bakkie, pickup or ute in the nose! However I might see if I can get some Hornady for testing which I think is what Vic used.

The cast bullets holes in the targets were maybe a bit oval, and I am suspicious that they are not engaging the rifling correctly. May try a gas check type.

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Thomas Turner .450 2 3/4" BPE return to service	ChrisPer	17/03/14 09:27 PM
Re: Thomas Turner .450 2 3/4" BPE return to service	Ckhobart	22/03/14 03:56 AM
Re: Thomas Turner .450 2 3/4" BPE return to service	DarylS	22/03/14 04:09 AM
Re: Thomas Turner .450 2 3/4" BPE return to service	ChrisPer	08/04/14 08:54 PM
Re: Thomas Turner .450 2 3/4" BPE return to service	ChrisPer	05/07/14 08:35 PM
Re: Thomas Turner .450 2 3/4" BPE return to service	TH44	07/07/14 08:50 AM
Re: Thomas Turner .450 2 3/4" BPE return to service	ChrisPer	21/07/14 08:48 PM
Re: Thomas Turner .450 2 3/4" BPE return to service	ChrisPer	27/07/14 04:01 PM
Re: Thomas Turner .450 2 3/4" BPE return to service	underlever	28/07/14 10:28 AM
Re: Thomas Turner .450 2 3/4" BPE return to service	ChrisPer	01/12/14 09:38 PM
Re: Thomas Turner .450 2 3/4" BPE return to service	tinker	02/12/14 03:59 AM
Re: Thomas Turner .450 2 3/4" BPE return to service	ChrisPer	02/12/14 09:40 PM
Re: Thomas Turner .450 2 3/4" BPE return to service	ChrisPer	15/12/14 05:11 PM
Re: Thomas Turner .450 2 3/4" BPE return to service	ChrisPer	15/12/14 07:15 PM
Re: Thomas Turner .450 2 3/4" BPE return to service	Rigby270	15/12/14 08:17 PM
Re: Thomas Turner .450 2 3/4" BPE return to service	ChrisPer	15/12/14 08:58 PM
Re: Thomas Turner .450 2 3/4" BPE return to service	DarylS	16/12/14 04:31 AM
Re: Thomas Turner .450 2 3/4" BPE return to service	ChrisPer	16/12/14 03:44 PM
Re: Thomas Turner .450 2 3/4" BPE return to service	ChrisPer	19/12/14 02:09 AM
Re: Thomas Turner .450 2 3/4" BPE return to service	tinker	19/12/14 02:53 AM
Re: Thomas Turner .450 2 3/4" BPE return to service	Matabele	19/12/14 05:49 AM
Re: Thomas Turner .450 2 3/4" BPE return to service	ChrisPer	19/12/14 09:05 AM
Re: Thomas Turner .450 2 3/4" BPE return to service	Huvius	19/12/14 12:42 PM
Re: Thomas Turner .450 2 3/4" BPE return to service	tinker	19/12/14 01:37 PM
Re: Thomas Turner .450 2 3/4" BPE return to service	AkMike	19/12/14 11:11 PM
Re: Thomas Turner .450 2 3/4" BPE return to service	DarylS	20/12/14 03:10 AM
Re: Thomas Turner .450 2 3/4" BPE return to service	ChrisPer	13/03/15 09:20 PM
Re: Thomas Turner .450 2 3/4" BPE return to service	DarylS	14/03/15 02:11 AM
Re: Thomas Turner .450 2 3/4" BPE return to service	ChrisPer	14/03/15 08:45 PM
Re: Thomas Turner .450 2 3/4" BPE return to service	DarylS	15/03/15 03:29 AM

Extra information

0 registered and 5 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 12587

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved