Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: 9.3 mould questions

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Cast Bullets

Jim_C
.300 member

Reged: 09/08/14
Posts: 174
Loc: USA

Re: 9.3 mould questions
18/12/14 04:59 AM

From what I've heard, Lyman only sells gas checks of the Hornady pattern. I don't know if the old style checks are "collectible" but they are still in demand from some shooters.

Xausa, I've had the chance to try the tools sold by Patmarlin. Of the various tools I've used to produce gas checks, his press-mounted set-up is the easiest to use and most consistent. The end product isn't "the same" as the old-style Lyman checks, but accuracy is similar. My pet load in my good Krag shot a little high and left, but group size was as expected.

I'll probably purchase a set in 9.3 sooner or later. Gas checks for the 9.3 are currently available, but being it is a non-standard size in the US I don't trust that they will "always" be available.

Post Extras

Entire topic
Subject	Posted by	Posted on
9.3 mould questions	Jim_C	15/12/14 02:00 PM
Re: 9.3 mould questions	DarylS	15/12/14 06:39 PM
Re: 9.3 mould questions	aromakr	16/12/14 01:45 AM
Re: 9.3 mould questions	Jim_C	16/12/14 03:36 PM
Re: 9.3 mould questions	DarylS	17/12/14 03:05 AM
Re: 9.3 mould questions	wjw	17/12/14 03:16 PM
Re: 9.3 mould questions	DarylS	18/12/14 02:18 AM
Re: 9.3 mould questions	Jim_C	18/12/14 04:59 AM
Re: 9.3 mould questions	cordite	20/12/14 02:24 PM
Re: 9.3 mould questions	CptCurl	30/01/15 11:27 PM
Re: 9.3 mould questions	aromakr	31/01/15 01:56 AM
Re: 9.3 mould questions	Iowa_303s	31/01/15 10:42 AM
Re: 9.3 mould questions	DarylS	31/01/15 11:05 AM
Re: 9.3 mould questions	Iowa_303s	31/01/15 11:27 AM
Re: 9.3 mould questions	DarylS	01/02/15 06:04 AM
Re: 9.3 mould questions	Iowa_303s	01/02/15 07:25 AM
Re: 9.3 mould questions	DarylS	01/02/15 07:35 AM
Re: 9.3 mould questions	eagleyes	31/01/15 11:59 AM
Re: 9.3 mould questions	Jim_C	31/01/15 05:20 PM
Re: 9.3 mould questions	xausa	18/12/14 01:34 AM

Extra information

0 registered and 9 anonymous users are browsing this forum.

Moderator: DarylS

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 8326

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact