Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: 9.3 mould questions

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Cast Bullets

DarylS
.700 member

Reged: 10/08/05
Posts: 26515
Loc: Beautiful British Columbia, Ca...

Re: 9.3 mould questions
15/12/14 06:39 PM

.358 gas checks, I do not think, will be of any value on a .366" bullet - unless they are large enough when new (Hornady perhaps?), to fit the depth of the 9.3's grooves & then some. Undersized gas\checks will likely be of little value.

A simple card wad of approx. .368" diameter will work much better, but - it must be in contact with the bullet's base. You may have to make a punch to cut these. If you cannot obtain 9.3 gas checks, then consider using a card wad - again, if must be in contact with the bullet's base.

If using IMR Trail Boss powder, this will be easy loading to the base of a seated bullet with no need of a filler. V
VV powder, Tin Star may or may not also have use in such loads. Contact that powder maker for further info on it. If using faster burning, less bulky powders other than AA5744, then a filler between the bullet and powder of some sort will be needed. No filler is needed with AA5744, however, all others should be in contact with the powder.

If you keep the velocity below about 1,400fps, the bullets will most likely shoot very well without any gas check, if kept between 12 and 15 Brinell and under 25,000psi.

I suggest the 9.3 mould is meant for 9.3 gas checks, or if not, then perhaps re-sized .375 gas checks.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
9.3 mould questions	Jim_C	15/12/14 02:00 PM
Re: 9.3 mould questions	DarylS	15/12/14 06:39 PM
Re: 9.3 mould questions	aromakr	16/12/14 01:45 AM
Re: 9.3 mould questions	Jim_C	16/12/14 03:36 PM
Re: 9.3 mould questions	DarylS	17/12/14 03:05 AM
Re: 9.3 mould questions	wjw	17/12/14 03:16 PM
Re: 9.3 mould questions	DarylS	18/12/14 02:18 AM
Re: 9.3 mould questions	Jim_C	18/12/14 04:59 AM
Re: 9.3 mould questions	cordite	20/12/14 02:24 PM
Re: 9.3 mould questions	CptCurl	30/01/15 11:27 PM
Re: 9.3 mould questions	aromakr	31/01/15 01:56 AM
Re: 9.3 mould questions	Iowa_303s	31/01/15 10:42 AM
Re: 9.3 mould questions	DarylS	31/01/15 11:05 AM
Re: 9.3 mould questions	Iowa_303s	31/01/15 11:27 AM
Re: 9.3 mould questions	DarylS	01/02/15 06:04 AM
Re: 9.3 mould questions	Iowa_303s	01/02/15 07:25 AM
Re: 9.3 mould questions	DarylS	01/02/15 07:35 AM
Re: 9.3 mould questions	eagleyes	31/01/15 11:59 AM
Re: 9.3 mould questions	Jim_C	31/01/15 05:20 PM
Re: 9.3 mould questions	xausa	18/12/14 01:34 AM

Extra information

0 registered and 4 anonymous users are browsing this forum.

Moderator: DarylS

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 7886

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved