Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Dovetail cut into the receiver ring of my 1910 MS 9.5x57MS

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

DarylS
.700 member

Reged: 10/08/05
Posts: 26998
Loc: Beautiful British Columbia, Ca...

Re: Dovetail cut into the receiver ring of my 1910 MS 9.5x57MS
10/12/14 06:01 AM

Ackley used a standard M98 Mauser with the large dovetail cut on top of the front bridge.
This one, with the round used in the blowup tests, blew the barrel and top of the bridge off with the same load & ctg. that gave "normal" pressure in some of the other actions, among them a P17, iirc. I think the round was a .270 magnum probably on a belted 2 1/2" case - just a guess. So there you have the combination of what might or might not be be an overload for a normal action, with the larger diameter magnum case.

I expect it will be just fine with factory level loads.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras

Entire topic
Subject	Posted by	Posted on
Dovetail cut into the receiver ring of my 1910 MS 9.5x57MS	farshot	10/12/14 03:15 AM
Re: Dovetail cut into the receiver ring of my 1910 MS 9.5x57MS	xausa	10/12/14 04:26 AM
Re: Dovetail cut into the receiver ring of my 1910 MS 9.5x57MS	DarylS	10/12/14 06:01 AM
Re: Dovetail cut into the receiver ring of my 1910 MS 9.5x57MS	kuduae	10/12/14 07:08 AM
Re: Dovetail cut into the receiver ring of my 1910 MS 9.5x57MS	farshot	10/12/14 07:35 AM

Extra information

1 registered and 14 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2862

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact