Home | Ezine | Forums | Links | Contact
NitroExpress.com: Need help please with my CZ 550

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

Kano
.300 member


Reged: 09/07/03
Posts: 166
Loc: East Africa
Re: Need help please with my CZ 550
      19/09/14 01:47 AM

Somebody has turned the bolt shroud 90deg anti-clockwise, uncocking it. That's easy to do.

It's a bit harder to turn it back in its cocked position, but not really difficult.

When you look at what is the bottom of the shroud, you see the rectangular protrusion of the cocking piece. Its nose is engaged at the bottom of a V notch in the rear of the bolt body. This piece needs to rotate clockwise with the shroud, climbing the ramp on the notch, and it will click in its cocked position, which is a tiny notch on the back of the bolt body.

If your bolt is not too rough, simply holding the shroud tight and turning forcefully clockwise should do the trick. Wrapping it in a rag may help.

If it's too hard, one way is to use the corner of a wooden table (one on which you don't mine a scratch or dent, which is a possibility...) You hold the bolt vertically, firing pin end down, and catch the cocking piece on the wood. You can then press the bolt down, at the same time rotating the shroud.

--------------------
Philip

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Need help please with my CZ 550 Cazadero 19/09/14 12:11 AM
. * * Re: Need help please with my CZ 550 Kano   19/09/14 01:47 AM
. * * Re: Need help please with my CZ 550 Cazadero   19/09/14 12:59 PM
. * * Re: Need help please with my CZ 550 Kano   19/09/14 03:11 PM
. * * Re: Need help please with my CZ 550 9.3x57   20/09/14 03:37 AM
. * * Re: Need help please with my CZ 550 NitroXAdministrator   20/09/14 06:19 PM

Extra information
0 registered and 33 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2586

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved