Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Suitable steels for monoblock?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing

TennHillBilly
.275 member

Reged: 17/05/13
Posts: 69
Loc: Tennessee Plateau

Re: Suitable steels for monoblock?
06/06/14 12:03 AM

A little progress in fitting the lumps, and bites. Finally got my adjustable reamer and opened the hole to just fit the pin. It would have been much easier to have reamed the hole to begin with.....had I had the foresight to have the reamer on hand! I have cut and filed the 'bites', using my jeweler's saw, thinking everything was fitting fine. One pic shows the lumps fitted to the action. I had to flat file a good bit from the bottom of the block to allow it to slide onto the 'T'. There must be some clearance....as mentioned....between the barrel flats, and the watertable, or action flats.
Note in the pic that when locked, the lever is slightly to the right. That's supposed to be the correct position. I've read as the action wears, the lever moves to center.

Everything was going well until I put the locking bolt cam and lever in place. The bolt can only move as far rearward as the cam will allow. The pic shows where the rear of the front lump is catching, not allowing the lumps to seat. I must smoke and file a bit more of a radius.....but, it looked right!

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Suitable steels for monoblock?	TennHillBilly	24/03/14 02:37 AM
Re: Suitable steels for monoblock?	doubleriflejack	28/03/14 06:11 AM
Re: Suitable steels for monoblock?	TennHillBilly	29/03/14 06:26 AM
Re: Suitable steels for monoblock?	TennHillBilly	12/04/14 12:17 AM
Re: Suitable steels for monoblock?	Deutsche_Vortrekker	02/09/14 11:08 PM
Re: Suitable steels for monoblock?	TennHillBilly	04/09/14 05:41 AM
Re: Suitable steels for monoblock?	Dumprat	15/09/14 12:13 AM
Re: Suitable steels for monoblock?	TennHillBilly	13/04/14 07:07 AM
Re: Suitable steels for monoblock?	TennHillBilly	14/04/14 09:33 AM
Re: Suitable steels for monoblock?	Waidmannsheil	14/04/14 01:05 PM
Re: Suitable steels for monoblock?	ruffcountry	14/04/14 02:38 PM
Re: Suitable steels for monoblock?	TennHillBilly	15/04/14 04:42 AM
Re: Suitable steels for monoblock?	Shotgunlover	15/04/14 11:32 PM
Re: Suitable steels for monoblock?	TennHillBilly	16/04/14 12:02 AM
Re: Suitable steels for monoblock?	Shotgunlover	16/04/14 03:22 AM
Re: Suitable steels for monoblock?	TennHillBilly	16/04/14 05:08 AM
Re: Suitable steels for monoblock?	Shotgunlover	16/04/14 05:35 AM
Re: Suitable steels for monoblock?	TennHillBilly	16/04/14 11:53 PM
Re: Suitable steels for monoblock?	TennHillBilly	25/04/14 03:58 AM
Re: Suitable steels for monoblock?	TennHillBilly	30/04/14 11:30 PM
Re: Suitable steels for monoblock?	Shotgunlover	03/05/14 03:47 AM
Re: Suitable steels for monoblock?	TennHillBilly	03/05/14 07:39 AM
Re: Suitable steels for monoblock?	TennHillBilly	05/05/14 02:04 AM
Re: Suitable steels for monoblock?	TennHillBilly	16/05/14 04:27 AM
Re: Suitable steels for monoblock?	Shotgunlover	17/05/14 04:28 AM
Re: Suitable steels for monoblock?	TennHillBilly	18/05/14 08:36 AM
Re: Suitable steels for monoblock?	Crusader68	14/09/14 04:54 AM
Re: Suitable steels for monoblock?	TennHillBilly	17/09/14 02:56 AM
Re: Suitable steels for monoblock?	aromakr	19/09/14 01:44 AM
Re: Suitable steels for monoblock?	TennHillBilly	21/09/14 09:40 AM
Re: Suitable steels for monoblock?	aromakr	23/09/14 12:17 AM
Re: Suitable steels for monoblock?	transvaal	25/09/14 12:12 AM
Re: Suitable steels for monoblock?	aromakr	25/09/14 11:49 PM
Re: Suitable steels for monoblock?	TennHillBilly	16/11/14 03:58 AM
Re: Suitable steels for monoblock?	TennHillBilly	27/04/15 05:09 AM
Re: Suitable steels for monoblock?	TennHillBilly	08/05/15 09:59 AM
Re: Suitable steels for monoblock?	TennHillBilly	13/05/15 08:21 AM
Re: Suitable steels for monoblock?	TennHillBilly	15/05/15 06:45 AM
Re: Suitable steels for monoblock?	TennHillBilly	21/05/15 05:12 AM
Re: Suitable steels for monoblock?	TennHillBilly	24/05/15 06:15 AM
Re: Suitable steels for monoblock?	TennHillBilly	28/05/15 06:53 AM
Re: Suitable steels for monoblock?	TennHillBilly	06/06/15 06:02 AM
Re: Suitable steels for monoblock?	TennHillBilly	20/06/15 04:02 AM
Re: Suitable steels for monoblock?	TennHillBilly	09/07/15 04:59 AM
Re: Suitable steels for monoblock?	TennHillBilly	23/07/15 09:17 AM
Re: Suitable steels for monoblock?	DarylS	23/07/15 11:14 AM
Re: Suitable steels for monoblock?	TennHillBilly	25/07/15 12:13 AM
Re: Suitable steels for monoblock?	TennHillBilly	07/08/15 01:23 AM
Re: Suitable steels for monoblock?	TennHillBilly	15/08/15 04:09 AM
Re: Suitable steels for monoblock?	Dumprat	23/09/14 02:46 AM
Re: Suitable steels for monoblock?	TennHillBilly	20/05/14 07:13 AM
Re: Suitable steels for monoblock?	TennHillBilly	22/05/14 07:28 AM
Re: Suitable steels for monoblock?	aromakr	27/05/14 11:45 PM
Re: Suitable steels for monoblock?	TennHillBilly	31/05/14 12:40 AM
Re: Suitable steels for monoblock?	TennHillBilly	06/06/14 12:03 AM
Re: Suitable steels for monoblock?	TennHillBilly	12/06/14 05:01 AM
Re: Suitable steels for monoblock?	Shotgunlover	13/06/14 06:37 PM
Re: Suitable steels for monoblock?	Waidmannsheil	14/06/14 08:08 AM
Re: Suitable steels for monoblock?	TennHillBilly	02/09/14 01:36 AM
Re: Suitable steels for monoblock?	Dumprat	12/04/14 01:32 AM
Re: Suitable steels for monoblock?	Dumprat	24/03/14 03:31 AM

Extra information

0 registered and 3 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 25463

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved