Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Barrel considerations?

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing

Birdhunter50
.375 member

Reged: 03/06/07
Posts: 815
Loc: Iowa,U.S.A.

Re: Barrel considerations?
23/02/14 06:38 AM

THB,
If this is your first conversion gun I would forget about building your own monoblock unless you have lots of equiptment and machining experience. As far as barrels go, if you use the 12 gauge barrels for the monoblock your barrel diameter needs to be as large as the shotgun barrels so they can be joined at that point. You will want to contour them to about the thinnest profile that most barrel companies offer. Even that may be a little heavy. Good luck with your project. Bob

Post Extras

Entire topic
Subject	Posted by	Posted on
Barrel considerations?	TennHillBilly	16/02/14 04:30 AM
Re: Barrel considerations?	Birdhunter50	23/02/14 06:38 AM
Re: Barrel considerations?	dpcd67	22/04/14 07:51 AM
Re: Barrel considerations?	Ckhobart	16/02/14 08:24 AM

Extra information

0 registered and 73 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 1643

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact