Home | Ezine | Forums | Links | Contact
NitroExpress.com: Using PB projectiles designed for PP, as GC non PP

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Cast Bullets

eljefedouble
.300 member


Reged: 23/04/06
Posts: 189
Loc: Vic, Australia
Re: Using PB projectiles designed for PP, as GC non PP
      27/01/14 02:39 PM

Quote:

You can also try the moly coating the bullets. Lyman sells a decent one that used to be called MS Moly - same spray can, different label.
Some guys coat jacketed bullets in a tumbler with the moly powder.
Spray or tumbling, either works and might work perfectly on the smooth sided bullets.
Now - what diameter are the bullets. Most PP moulds cast undersize to allow for the paper patching.

With paper, you only need a small amount of lube rubbed onto the paper - even graphite powder will work with smokeless powders - your aluminum gas check should keep the base from distortion or melting. The paper patched bullets can also be sprayed with the aerosol moly.

Need more information about your bullets, diameters, methods of patching, diameter after patching, etc.




Daryl,
The mould drops them at 350 gr with the pin extended in the OUT position, and when pushed IN, depth minimum, its 250 gr
Alloy is 4:1- Pure Lead: Chilled shot for a stated BHN of about 10
I'll upload a few pics later when I can, the dia is miking as 0.4225
havent PP them yet...Just got the mold back in its Mk3 avatar, after more tweaking.I think I'll stop here.
My first attempt to 'design' a mold, if you excuse the blasphemy...







--------------------
"it dont mean a thing, if it aint got no zing"
"Toa bunduki mkubwa"

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Using PB projectiles designed for PP, as GC non PP eljefedouble 27/01/14 12:48 AM
. * * Re: Using PB projectiles designed for PP, as GC non PP Huvius   27/01/14 02:05 AM
. * * Re: Using PB projectiles designed for PP, as GC non PP eljefedouble   27/01/14 02:18 PM
. * * Re: Using PB projectiles designed for PP, as GC non PP DarylSModerator   27/01/14 06:23 AM
. * * Re: Using PB projectiles designed for PP, as GC non PP eljefedouble   27/01/14 02:39 PM
. * * Re: Using PB projectiles designed for PP, as GC non PP 93x64mm   27/01/14 04:25 PM
. * * Re: Using PB projectiles designed for PP, as GC non PP 93x64mm   27/01/14 04:45 PM
. * * Re: Using PB projectiles designed for PP, as GC non PP Oldbrit   27/01/14 08:54 PM
. * * Re: Using PB projectiles designed for PP, as GC non PP DarylSModerator   28/01/14 03:40 AM
. * * Re: Using PB projectiles designed for PP, as GC non PP eljefedouble   28/01/14 06:53 PM
. * * Re: Using PB projectiles designed for PP, as GC non PP gungadoug   29/03/14 11:51 PM
. * * Re: Using PB projectiles designed for PP, as GC non PP DarylSModerator   30/03/14 05:22 AM
. * * Re: Using PB projectiles designed for PP, as GC non PP AFRO408   11/08/14 08:21 AM
. * * Re: Using PB projectiles designed for PP, as GC non PP DarylSModerator   11/08/14 09:34 AM
. * * Re: Using PB projectiles designed for PP, as GC non PP eljefedouble   11/08/14 08:03 PM
. * * Re: Using PB projectiles designed for PP, as GC non PP AFRO408   12/08/14 10:03 AM
. * * Re: Using PB projectiles designed for PP, as GC non PP eljefedouble   12/08/14 11:00 AM
. * * Re: Using PB projectiles designed for PP, as GC non PP DarylSModerator   12/08/14 11:30 AM
. * * Re: Using PB projectiles designed for PP, as GC non PP eljefedouble   20/08/14 12:42 PM
. * * Re: Using PB projectiles designed for PP, as GC non PP DarylSModerator   21/08/14 01:33 AM
. * * Re: Using PB projectiles designed for PP, as GC non PP 93x64mm   27/01/14 09:46 AM
. * * Re: Using PB projectiles designed for PP, as GC non PP eljefedouble   27/01/14 02:23 PM

Extra information
0 registered and 1 anonymous users are browsing this forum.

Moderator:  DarylS 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 10744

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved