Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Using PB projectiles designed for PP, as GC non PP

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Cast Bullets

DarylS
.700 member

Reged: 10/08/05
Posts: 27006
Loc: Beautiful British Columbia, Ca...

Re: Using PB projectiles designed for PP, as GC non PP
27/01/14 06:23 AM

You can also try the moly coating the bullets. Lyman sells a decent one that used to be called MS Moly - same spray can, different label.
Some guys coat jacketed bullets in a tumbler with the moly powder.
Spray or tumbling, either works and might work perfectly on the smooth sided bullets.
Now - what diameter are the bullets. Most PP moulds cast undersize to allow for the paper patching.

With paper, you only need a small amount of lube rubbed onto the paper - even graphite powder will work with smokeless powders - your aluminum gas check should keep the base from distortion or melting. The paper patched bullets can also be sprayed with the aerosol moly.

Need more information about your bullets, diameters, methods of patching, diameter after patching, etc.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras

Entire topic
Subject	Posted by	Posted on
Using PB projectiles designed for PP, as GC non PP	eljefedouble	27/01/14 12:48 AM
Re: Using PB projectiles designed for PP, as GC non PP	Huvius	27/01/14 02:05 AM
Re: Using PB projectiles designed for PP, as GC non PP	eljefedouble	27/01/14 02:18 PM
Re: Using PB projectiles designed for PP, as GC non PP	DarylS	27/01/14 06:23 AM
Re: Using PB projectiles designed for PP, as GC non PP	eljefedouble	27/01/14 02:39 PM
Re: Using PB projectiles designed for PP, as GC non PP	93x64mm	27/01/14 04:25 PM
Re: Using PB projectiles designed for PP, as GC non PP	93x64mm	27/01/14 04:45 PM
Re: Using PB projectiles designed for PP, as GC non PP	Oldbrit	27/01/14 08:54 PM
Re: Using PB projectiles designed for PP, as GC non PP	DarylS	28/01/14 03:40 AM
Re: Using PB projectiles designed for PP, as GC non PP	eljefedouble	28/01/14 06:53 PM
Re: Using PB projectiles designed for PP, as GC non PP	gungadoug	29/03/14 11:51 PM
Re: Using PB projectiles designed for PP, as GC non PP	DarylS	30/03/14 05:22 AM
Re: Using PB projectiles designed for PP, as GC non PP	AFRO408	11/08/14 08:21 AM
Re: Using PB projectiles designed for PP, as GC non PP	DarylS	11/08/14 09:34 AM
Re: Using PB projectiles designed for PP, as GC non PP	eljefedouble	11/08/14 08:03 PM
Re: Using PB projectiles designed for PP, as GC non PP	AFRO408	12/08/14 10:03 AM
Re: Using PB projectiles designed for PP, as GC non PP	eljefedouble	12/08/14 11:00 AM
Re: Using PB projectiles designed for PP, as GC non PP	DarylS	12/08/14 11:30 AM
Re: Using PB projectiles designed for PP, as GC non PP	eljefedouble	20/08/14 12:42 PM
Re: Using PB projectiles designed for PP, as GC non PP	DarylS	21/08/14 01:33 AM
Re: Using PB projectiles designed for PP, as GC non PP	93x64mm	27/01/14 09:46 AM
Re: Using PB projectiles designed for PP, as GC non PP	eljefedouble	27/01/14 02:23 PM

Extra information

0 registered and 52 anonymous users are browsing this forum.

Moderator: DarylS

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 10868

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact