Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: How hard would it be to convert a ruger #1 in 45/70 to 50-70

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Single Shots & Combination Guns

AZDAVE
.275 member

Reged: 12/02/09
Posts: 75
Loc: Arizona, USA

Re: How hard would it be to convert a ruger #1 in 45/70 to 50-70
23/12/13 01:48 PM

Putting on a new tube is the easiest.

I have a #1 in 50 AK and one in 500NE both are fine rounds. If you go to a 50/70 and want to lengthen the chamber at some point you can go to 50/90 Sharps or 50/110 but not to a 50 AK as the base of the 50 AK is smaller than the old buffalo rounds. Starline makes affordable brass for all of brass for all but the 500 NE. All of them in a #1 will give you all the fun you want:-) Good luck on your project.

Post Extras

Entire topic
Subject	Posted by	Posted on
How hard would it be to convert a ruger #1 in 45/70 to 50-70	FrankS	14/12/13 05:46 PM
Re: How hard would it be to convert a ruger #1 in 45/70 to 50-70	aromakr	15/12/13 03:11 AM
Re: How hard would it be to convert a ruger #1 in 45/70 to 50-70	Huvius	15/12/13 03:59 AM
Re: How hard would it be to convert a ruger #1 in 45/70 to 50-70	DarylS	15/12/13 05:34 AM
Re: How hard would it be to convert a ruger #1 in 45/70 to 50-70	AkMike	16/12/13 04:46 PM
Re: How hard would it be to convert a ruger #1 in 45/70 to 50-70	BB416	16/12/13 11:06 PM
Re: How hard would it be to convert a ruger #1 in 45/70 to 50-70	headoftheholler	16/12/13 11:15 PM
Re: How hard would it be to convert a ruger #1 in 45/70 to 50-70	Grenadier	17/12/13 12:31 AM
Re: How hard would it be to convert a ruger #1 in 45/70 to 50-70	michaelj	17/12/13 04:53 AM
Re: How hard would it be to convert a ruger #1 in 45/70 to 50-70	AkMike	17/12/13 05:29 AM
Re: How hard would it be to convert a ruger #1 in 45/70 to 50-70	93x64mm	17/12/13 07:05 AM
Re: How hard would it be to convert a ruger #1 in 45/70 to 50-70	DarylS	18/12/13 04:41 AM
Re: How hard would it be to convert a ruger #1 in 45/70 to 50-70	AkMike	18/12/13 05:39 AM
Re: How hard would it be to convert a ruger #1 in 45/70 to 50-70	DarylS	19/12/13 03:44 AM
Re: How hard would it be to convert a ruger #1 in 45/70 to 50-70	FrankS	22/12/13 10:41 PM
Re: How hard would it be to convert a ruger #1 in 45/70 to 50-70	AkMike	23/12/13 05:42 AM
Re: How hard would it be to convert a ruger #1 in 45/70 to 50-70	AZDAVE	23/12/13 01:48 PM
Re: How hard would it be to convert a ruger #1 in 45/70 to 50-70	Ireload2	25/12/13 06:52 PM
Re: How hard would it be to convert a ruger #1 in 45/70 to 50-70	lancaster	27/12/13 03:35 PM
Re: How hard would it be to convert a ruger #1 in 45/70 to 50-70	Al333	27/12/13 04:40 PM
Re: How hard would it be to convert a ruger #1 in 45/70 to 50-70	FrankS	05/01/14 05:19 PM
Re: How hard would it be to convert a ruger #1 in 45/70 to 50-70	DarylS	26/12/13 05:24 PM
Re: How hard would it be to convert a ruger #1 in 45/70 to 50-70	DarylS	26/12/13 05:28 PM
Re: How hard would it be to convert a ruger #1 in 45/70 to 50-70	Rell	27/12/13 02:32 PM

Extra information

0 registered and 54 anonymous users are browsing this forum.

Moderator: Huvius

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 11289

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact