Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Forming cases for 6.5x53R

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

2152hq
.300 member

Reged: 20/05/12
Posts: 126
Loc: USA

Re: Forming cases for 6.5x53R
22/12/13 09:12 AM

Like Tinker,,I don't swedge the case head at all, just the brass ahead of it. If anything, sometimes I used to have to trim the head dia down on some 303 brass to allow chambering. Not so with the HXP stuff.
After the first firing it's neck size only.

My 220 Swift cases are .446/.447dia at the head.
From what I read,,and I realize I can't believe everything I read,,that's about right for the 220 brass.,,and about right for the M/S case.

If that's 'small' for the x53R it doesn't seem to be so (at least for my rifle). They form, load and fire just fine.
Some 1915 dated x53R Military ammo I have mics .448 right ahead of the rim

Makes fine M/S cases too if you need to.
No lop-sided swayback cases,,no cracks, just usable brass that go 6 to 8 loadings then I toss them.

No thick neck problem with the 303HXP,,just the small step at the base of the neck inside after forming. Probably heavier brass in the Military cases or just the thicker wall forming up where the new neck is being pushed back too.
The drill takes care of it nicely. ('G' drill, I went and looked. .261d and probably cuts a bit oversize so it's OK. Slips right into the case mouth and down to the 'step'. A quick couple of twists and it's clear.)

Keep it simple.

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Forming cases for 6.5x53R	Spud303	08/10/13 07:42 PM
Re: Forming cases for 6.5x53R	Carpetsahib	09/10/13 02:11 AM
Re: Forming cases for 6.5x53R	kuduae	09/10/13 08:07 AM
Re: Forming cases for 6.5x53R	Claydog	09/10/13 09:01 AM
Re: Forming cases for 6.5x53R	Spud303	09/10/13 01:34 PM
Re: Forming cases for 6.5x53R	Claydog	09/10/13 01:41 PM
Re: Forming cases for 6.5x53R	Igorrock	09/10/13 06:58 PM
Re: Forming cases for 6.5x53R	Claydog	09/10/13 10:28 PM
Re: Forming cases for 6.5x53R	2152hq	10/10/13 12:21 PM
Re: Forming cases for 6.5x53R	Huvius	10/10/13 02:03 PM
Re: Forming cases for 6.5x53R	kuduae	13/10/13 06:44 AM
Re: Forming cases for 6.5x53R	lancaster	13/10/13 10:56 PM
Re: Forming cases for 6.5x53R	kuduae	14/10/13 03:23 AM
Re: Forming cases for 6.5x53R	Huvius	13/10/13 07:43 AM
Re: Forming cases for 6.5x53R	kuduae	13/10/13 08:56 AM
Re: Forming cases for 6.5x53R	Huvius	14/10/13 02:53 AM
Re: Forming cases for 6.5x53R	kuduae	14/10/13 03:38 AM
Re: Forming cases for 6.5x53R	Claydog	14/10/13 01:29 PM
Re: Forming cases for 6.5x53R	Spud303	14/10/13 06:26 PM
Re: Forming cases for 6.5x53R	Ireload2	17/12/13 11:56 AM
Re: Forming cases for 6.5x53R	tinker	17/12/13 02:59 PM
Re: Forming cases for 6.5x53R	2152hq	17/12/13 03:50 PM
Re: Forming cases for 6.5x53R	FrankS	22/12/13 10:54 PM
Re: Forming cases for 6.5x53R	Sarg	24/12/13 09:49 PM
Re: Forming cases for 6.5x53R	DarylS	25/12/13 03:48 AM
Re: Forming cases for 6.5x53R	Sarg	25/12/13 02:27 PM
Re: Forming cases for 6.5x53R	sparks1	23/12/13 05:10 AM
Re: Forming cases for 6.5x53R	2152hq	23/12/13 02:53 PM
Re: Forming cases for 6.5x53R	DarylS	18/12/13 04:28 AM
Re: Forming cases for 6.5x53R	Ireload2	20/12/13 06:06 AM
Re: Forming cases for 6.5x53R	tinker	20/12/13 10:15 AM
Re: Forming cases for 6.5x53R	2152hq	22/12/13 09:12 AM
Re: Forming cases for 6.5x53R	Igorrock	08/10/13 08:16 PM
Re: Forming cases for 6.5x53R	Spud303	08/10/13 08:32 PM
Re: Forming cases for 6.5x53R	HuntingSchneider	08/10/13 11:11 PM

Extra information

1 registered and 72 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 21057

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved