Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Forming cases for 6.5x53R

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

2152hq
.300 member

Reged: 20/05/12
Posts: 126
Loc: USA

Re: Forming cases for 6.5x53R
17/12/13 03:50 PM

I do the same as tinker,,straight into the 6.5 M/S sizer then trim them. I use some HXP 303 brass and with that I have to inside neck ream,,I use a drill for that. It's a common letter or number size,,don't recall which it is now. I just keep one in the die box for that purpose. Sounds crude but I see no difference at the range. It just removes a slight ledge at the bottom of the neck inside where it meets the shoulder on a freshly formed HXP military case.
Commercial 303 or 30-40Krag brass seems not to need any inside neck reaming,,at least none that I've used so far.

Don't be skimpy on the case lube when you do the sizing operation, just avoid excess on the neck so you don't end up with dents in the newly formed 6.5 neck.

Neck size only after the first firing. They last quite a while for me, but I use minimum or near min loads anyway.

I've had good luck using 220 Swift brass.
Not that 220Swift is all that common but you never know who has what lying around.
I was fortunate to have a 100 or so cases given to me.
Expands easily in one step, definetly easier to do than the 303 neck down process. The slight semi-rim of the 220 works in my rifle as well as the full rimmed variety case. Might not work in others though.
They make good 6.5 M/S cases if you turn the rim down.

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Forming cases for 6.5x53R	Spud303	08/10/13 07:42 PM
Re: Forming cases for 6.5x53R	Carpetsahib	09/10/13 02:11 AM
Re: Forming cases for 6.5x53R	kuduae	09/10/13 08:07 AM
Re: Forming cases for 6.5x53R	Claydog	09/10/13 09:01 AM
Re: Forming cases for 6.5x53R	Spud303	09/10/13 01:34 PM
Re: Forming cases for 6.5x53R	Claydog	09/10/13 01:41 PM
Re: Forming cases for 6.5x53R	Igorrock	09/10/13 06:58 PM
Re: Forming cases for 6.5x53R	Claydog	09/10/13 10:28 PM
Re: Forming cases for 6.5x53R	2152hq	10/10/13 12:21 PM
Re: Forming cases for 6.5x53R	Huvius	10/10/13 02:03 PM
Re: Forming cases for 6.5x53R	kuduae	13/10/13 06:44 AM
Re: Forming cases for 6.5x53R	lancaster	13/10/13 10:56 PM
Re: Forming cases for 6.5x53R	kuduae	14/10/13 03:23 AM
Re: Forming cases for 6.5x53R	Huvius	13/10/13 07:43 AM
Re: Forming cases for 6.5x53R	kuduae	13/10/13 08:56 AM
Re: Forming cases for 6.5x53R	Huvius	14/10/13 02:53 AM
Re: Forming cases for 6.5x53R	kuduae	14/10/13 03:38 AM
Re: Forming cases for 6.5x53R	Claydog	14/10/13 01:29 PM
Re: Forming cases for 6.5x53R	Spud303	14/10/13 06:26 PM
Re: Forming cases for 6.5x53R	Ireload2	17/12/13 11:56 AM
Re: Forming cases for 6.5x53R	tinker	17/12/13 02:59 PM
Re: Forming cases for 6.5x53R	2152hq	17/12/13 03:50 PM
Re: Forming cases for 6.5x53R	FrankS	22/12/13 10:54 PM
Re: Forming cases for 6.5x53R	Sarg	24/12/13 09:49 PM
Re: Forming cases for 6.5x53R	DarylS	25/12/13 03:48 AM
Re: Forming cases for 6.5x53R	Sarg	25/12/13 02:27 PM
Re: Forming cases for 6.5x53R	sparks1	23/12/13 05:10 AM
Re: Forming cases for 6.5x53R	2152hq	23/12/13 02:53 PM
Re: Forming cases for 6.5x53R	DarylS	18/12/13 04:28 AM
Re: Forming cases for 6.5x53R	Ireload2	20/12/13 06:06 AM
Re: Forming cases for 6.5x53R	tinker	20/12/13 10:15 AM
Re: Forming cases for 6.5x53R	2152hq	22/12/13 09:12 AM
Re: Forming cases for 6.5x53R	Igorrock	08/10/13 08:16 PM
Re: Forming cases for 6.5x53R	Spud303	08/10/13 08:32 PM
Re: Forming cases for 6.5x53R	HuntingSchneider	08/10/13 11:11 PM

Extra information

1 registered and 76 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 21057

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved