Home | Ezine | Forums | Links | Contact
NitroExpress.com: 450-400 3 inch loads?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifles
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

Williford
.224 member


Reged: 01/03/07
Posts: 2
Loc: Houston, Texas
Re: 450-400 3 inch loads?
      22/11/13 07:54 AM

I have a Heym 450-400 3" and had some initial problems in getting the barrels to regulate. The gun was originally regulated at the factory with Hornady factory ammo. Results below:

Factory Hornady 400 gr. loads:

2071 fps in right barrel
2086 in Left barrel

Barrels both grouped well separately but there was about 4 horizontal inches between each group.

Reloading results - all loads used RL 15 and Kynoch wads.

Hornady 400 gr. DGX and 69 gr. RL15
velocity - 2140 fps
very good regulation


North Fork 400 gr. softs and 68 gr. RL 15
velocity - 2150 fps
very good regulation


North Fork 400 gr. FPS and 66.5 gr. RL 15
velocity - 2145 fps
very good regulation

the North Fork softs and FPS both grouped together.

I obviously needed a little more velocity to get the barrels to regulate (for my shooting technique) than the loads the rifle was originally regulated with. I feel I could have also obtained good regulation using H4831 with no wads.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* 450-400 3 inch loads? Rell 22/10/13 10:57 PM
. * * Re: 450-400 3 inch loads? 500Nitro   22/10/13 11:08 PM
. * * Re: 450-400 3 inch loads? Rell   23/10/13 08:57 AM
. * * Re: 450-400 3 inch loads? 500Nitro   23/10/13 09:30 AM
. * * Re: 450-400 3 inch loads? Rell   23/10/13 09:34 AM
. * * Re: 450-400 3 inch loads? 500Nitro   23/10/13 12:05 PM
. * * Re: 450-400 3 inch loads? eagle27   23/10/13 05:36 PM
. * * Re: 450-400 3 inch loads? Rell   24/10/13 09:12 AM
. * * Re: 450-400 3 inch loads? 500Nitro   24/10/13 10:19 AM
. * * Re: 450-400 3 inch loads? bwanabobftw   24/10/13 08:05 PM
. * * Re: 450-400 3 inch loads? 500Nitro   24/10/13 08:23 PM
. * * Re: 450-400 3 inch loads? Rell   24/10/13 11:50 PM
. * * Re: 450-400 3 inch loads? 500Nitro   25/10/13 12:24 AM
. * * Re: 450-400 3 inch loads? Rell   25/10/13 06:05 AM
. * * Re: 450-400 3 inch loads? 500Nitro   25/10/13 06:47 AM
. * * Re: 450-400 3 inch loads? AkMike   25/10/13 04:06 PM
. * * Re: 450-400 3 inch loads? Bayoubob   30/10/13 01:29 PM
. * * Re: 450-400 3 inch loads? Williford   22/11/13 07:54 AM
. * * Re: 450-400 3 inch loads? 500Nitro   22/11/13 07:56 AM
. * * Re: 450-400 3 inch loads? Rell   22/11/13 09:52 AM
. * * 500Nitro Williford   23/11/13 11:38 AM
. * * Re: 500Nitro 500Nitro   23/11/13 12:33 PM
. * * Re: 500Nitro Rell   11/12/13 12:59 PM

Extra information
0 registered and 826 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 9192

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved