Home | Ezine | Forums | Links | Contact
NitroExpress.com: 450-400 3 inch loads?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifles
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

Bayoubob
.224 member


Reged: 10/05/11
Posts: 9
Loc: Arkansas
Re: 450-400 3 inch loads?
      30/10/13 01:29 PM

Rell, Try Reloader 22. In my Ruger #1 it matched the factory Hornady velocity (with DGX bullets and Hornady brass) at around 83 or 84 grains. (I pushed it on to 90 grains and 2230fps in the #1 but that's not what you want to do.) Since it burns slower it might help with the crossing problem when you get to factory velocity. The other factor which you touched on is the crimp. Try pulling a bullet from a factory round and measure the inside diameter of the neck. See if your resized cases are the same inside diameter. Your answer may lie somewhere in the case neck tension details whether from the crimp or the case neck itself. A 4 inch composite group at 100 isn't anything to be ashamed of either.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* 450-400 3 inch loads? Rell 22/10/13 10:57 PM
. * * Re: 450-400 3 inch loads? 500Nitro   22/10/13 11:08 PM
. * * Re: 450-400 3 inch loads? Rell   23/10/13 08:57 AM
. * * Re: 450-400 3 inch loads? 500Nitro   23/10/13 09:30 AM
. * * Re: 450-400 3 inch loads? Rell   23/10/13 09:34 AM
. * * Re: 450-400 3 inch loads? 500Nitro   23/10/13 12:05 PM
. * * Re: 450-400 3 inch loads? eagle27   23/10/13 05:36 PM
. * * Re: 450-400 3 inch loads? Rell   24/10/13 09:12 AM
. * * Re: 450-400 3 inch loads? 500Nitro   24/10/13 10:19 AM
. * * Re: 450-400 3 inch loads? bwanabobftw   24/10/13 08:05 PM
. * * Re: 450-400 3 inch loads? 500Nitro   24/10/13 08:23 PM
. * * Re: 450-400 3 inch loads? Rell   24/10/13 11:50 PM
. * * Re: 450-400 3 inch loads? 500Nitro   25/10/13 12:24 AM
. * * Re: 450-400 3 inch loads? Rell   25/10/13 06:05 AM
. * * Re: 450-400 3 inch loads? 500Nitro   25/10/13 06:47 AM
. * * Re: 450-400 3 inch loads? AkMike   25/10/13 04:06 PM
. * * Re: 450-400 3 inch loads? Bayoubob   30/10/13 01:29 PM
. * * Re: 450-400 3 inch loads? Williford   22/11/13 07:54 AM
. * * Re: 450-400 3 inch loads? 500Nitro   22/11/13 07:56 AM
. * * Re: 450-400 3 inch loads? Rell   22/11/13 09:52 AM
. * * 500Nitro Williford   23/11/13 11:38 AM
. * * Re: 500Nitro 500Nitro   23/11/13 12:33 PM
. * * Re: 500Nitro Rell   11/12/13 12:59 PM

Extra information
0 registered and 725 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 9191

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved