Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Newbie questions about MS1910 (9,5x57MS)

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

Brento
.224 member

Reged: 27/05/13
Posts: 1
Loc: Queensland, Australia

MS1910 (9,5x57MS)
02/09/13 09:10 PM

Hi All

I have also been luck enough to inherit a 9.5 x 57 MS 1910 from my Grandfather. The rifle was originally bought to shoot lions with in Southern Rhodesia. My Grandfather carried and used this rifle in the Zambezi Valley in the 1950's whilst working on the Kariba Dam project. I bought this rifle over with me to Australia over 4 years ago and have aquired a set of CH4 dies and neck expanders. My reloading and case forming has up to this point been mainly trial and error, with information sourced from the internet and this forum in particular.

I am using Winchester 3006 cases to create my cases, which seem to work well. As far as reloading goes I have been using 46 and 47 gr AR2206H behind Hornady 270 gr spire points. I do not know the velocity of these loads, but there are no signs of pressure with the 47 gr. thinking this maybe around 2200 ftps? I have recently loaded up some Speer 235 gr with 47 to 49 gr, but yet to test them at the range in Brisbane. Apparently from what I have read 49.5 gr IMR 4895 potentially gives around 2400 fps from the rifle (mine is the rifle not the carbine)?

Does anyone have any more information/experience with loads for the 9.5?

Cheers

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Newbie questions about MS1910 (9,5x57MS)	kumpe	03/06/13 06:01 AM
Re: Newbie questions about MS1910 (9,5x57MS)	xausa	29/10/13 06:23 AM
Re: Newbie questions about MS1910 (9,5x57MS)	kumpe	29/10/13 07:55 AM
Re: Newbie questions about MS1910 (9,5x57MS)	Igorrock	03/06/13 06:27 AM
Re: Newbie questions about MS1910 (9,5x57MS)	kumpe	03/06/13 06:48 AM
Re: Newbie questions about MS1910 (9,5x57MS)	HendrikNZ	03/06/13 06:59 AM
Re: Newbie questions about MS1910 (9,5x57MS)	DarylS	03/06/13 08:16 AM
Re: Newbie questions about MS1910 (9,5x57MS)	pondoro62	03/06/13 09:45 AM
Re: Newbie questions about MS1910 (9,5x57MS)	Marrakai	04/06/13 12:08 AM
Re: Newbie questions about MS1910 (9,5x57MS)	kumpe	04/06/13 03:56 AM
Re: Newbie questions about MS1910 (9,5x57MS)	DarylS	04/06/13 04:41 AM
Re: Newbie questions about MS1910 (9,5x57MS)	kumpe	04/06/13 04:56 AM
Re: Newbie questions about MS1910 (9,5x57MS)	DarylS	05/06/13 12:21 AM
Re: Newbie questions about MS1910 (9,5x57MS)	kumpe	05/06/13 02:35 AM
Re: Newbie questions about MS1910 (9,5x57MS)	DarylS	03/09/13 02:17 AM
Re: Newbie questions about MS1910 (9,5x57MS)	kuduae	03/09/13 04:18 AM
Re: Newbie questions about MS1910 (9,5x57MS)	kumpe	28/10/13 06:14 AM
Re: Newbie questions about MS1910 (9,5x57MS)	Kiwi_bloke	06/06/13 06:59 AM
MS1910 (9,5x57MS)	Brento	02/09/13 09:10 PM
Re: MS1910 (9,5x57MS)	DonZ	02/09/13 10:53 PM
Re: Newbie questions about MS1910 (9,5x57MS)	kumpe	07/06/13 04:58 PM

Extra information

0 registered and 43 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 11283

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved