Home | Ezine | Forums | Links | Contact
NitroExpress.com: Advice/comments on regulation for a new custom DR

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Double Rifles

NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39896
Loc: Barossa Valley, South Australi...
Advice/comments on regulation for a new custom DR
      30/07/13 11:45 PM

I am looking to have a DR made in .375 Flanged Magnum.

Some comments. It is planned to use this rifle for a lot of different hunting. Buffalo, elephant, etc, plus larger plains game. Deer, pigs, boar, moose etc etc.

As such open sights won't do all that is required. In some form or other the rifle will be used for some longer ranged shooting. By this I mean realistic ranges, 200 metres, maybe 300 metres. At the longer ranges even if only one barrel cuts it.

The scope will be something like a 1-4x, S&B, Zeiss, Swarovski, or similar.

While maybe superfluous I would like a Docter dot point option as well ...

I have been asked to specify the regulation required.

One scenario (recommended):
- regulate the barrels with the primary sight being the scope. A inch apart at 100 metres.
- without the scope fitted, it was mentioned the open sights will shoot about 25 mm's crossing at 50 metres.

Second scenario:
- regulate the barrels for the express sights, an inch apart approx at 100 m.
- with the scope fitted, the shots will be several inches apart at 100 metres.

Dot point sight:
- it was mentioned the dot point sight will also act somewhat like a scope in terms of its effect on regulation.
- my comment - perhaps less so, as it would be lighter?

Third scenario:
My comments only.
- IF the dot point sight affects the regulation similar to the scope in actual practice, it could be an alternative to the open sights, when the scope is not desired.



***

My initial preference was the second option. ie the express sights the most reliable option. Use the scope, sighted in for one barrel, try it out in actual practice to see how it performs.

My new preference is the first option. I will almost certainly use the scope most of the time for most of my hunting. If the scope is removed, 50 metres and crossing slightly won't be a big impediment for close shooting with a scope removed.

Try out the dot point sight and see how it performs.


***

Comments appreciated.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Advice/comments on regulation for a new custom DR NitroXAdministrator 30/07/13 11:45 PM
. * * Re: Advice/comments on regulation for a new custom DR Chasseur   28/08/13 12:39 PM
. * * Re: Advice/comments on regulation for a new custom DR NitroXAdministrator   28/08/13 07:56 PM
. * * Re: Advice/comments on regulation for a new custom DR Chasseur   29/08/13 04:02 AM
. * * Re: Advice/comments on regulation for a new custom DR gungadoug   29/08/13 12:31 AM
. * * Re: Advice/comments on regulation for a new custom DR gungadoug   31/07/13 12:26 AM
. * * Re: Advice/comments on regulation for a new custom DR NitroXAdministrator   26/08/13 01:31 PM
. * * Re: Advice/comments on regulation for a new custom DR alexbeer   27/08/13 12:33 PM
. * * Re: Advice/comments on regulation for a new custom DR NitroXAdministrator   28/08/13 09:15 AM
. * * Re: Advice/comments on regulation for a new custom DR doubleriflejack   29/08/13 05:19 AM
. * * Re: Advice/comments on regulation for a new custom DR NitroXAdministrator   31/08/13 03:54 AM

Extra information
0 registered and 840 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 4915

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved