Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: 10.75 x52r Springer finally fired

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifles

aromakr
.375 member

Reged: 20/04/11
Posts: 849
Loc: Hamilton, Montana

Re: 10.75 x52r Springer finally fired
20/07/13 07:48 AM

Sir:
I have to agree that your problem with bullet tension in the case is due to the expander button being too large.
Your full length sizing die has a stem inside it, that holds the de-caping pin and expander button. When you size the case, the neck is sized much smaller than necessary, as the case is removed from the die, the expander button brings it to its proper size.
If you remove that stem from the die and mic the button it will indicate its size. Depending on if you are using lead or jacketed bullets, that button should be .002 or .003 smaller that the bullet diameter. You can purchase expanding buttons of various sizes, or if you have the tools that one can be reduced to the proper size. Jacketed bullet diameter should be what you slugged groove diameter indicates and if using lead bullets they should be around .002 over size.
I don't believe you need another die, just alter the expanding button.
Bob

Post Extras

Entire topic
Subject	Posted by	Posted on
10.75 x52r Springer finally fired	oldcolonel	17/07/13 04:44 AM
Re: 10.75 x52r Springer finally fired	MikeRowe	17/07/13 08:17 AM
Re: 10.75 x52r Springer finally fired	oldcolonel	17/07/13 11:06 PM
Re: 10.75 x52r Springer finally fired	DarylS	17/07/13 11:57 PM
Re: 10.75 x52r Springer finally fired	Huvius	18/07/13 12:48 AM
Re: 10.75 x52r Springer finally fired	oldcolonel	18/07/13 03:59 AM
Re: 10.75 x52r Springer finally fired	MikeRowe	18/07/13 05:27 AM
Re: 10.75 x52r Springer finally fired	oldcolonel	18/07/13 09:41 AM
Re: 10.75 x52r Springer finally fired	MikeRowe	18/07/13 12:19 PM
Re: 10.75 x52r Springer finally fired	DarylS	19/07/13 12:26 AM
Re: 10.75 x52r Springer finally fired	Huvius	19/07/13 02:06 AM
Re: 10.75 x52r Springer finally fired	oldcolonel	19/07/13 05:13 AM
Re: 10.75 x52r Springer finally fired	DarylS	19/07/13 06:27 AM
Re: 10.75 x52r Springer finally fired	oldcolonel	19/07/13 07:15 AM
Re: 10.75 x52r Springer finally fired	DarylS	19/07/13 02:01 PM
Re: 10.75 x52r Springer finally fired	oldcolonel	20/07/13 01:46 AM
Re: 10.75 x52r Springer finally fired	DarylS	20/07/13 05:55 AM
Re: 10.75 x52r Springer finally fired	aromakr	20/07/13 07:48 AM
Re: 10.75 x52r Springer finally fired	MikeRowe	21/07/13 07:01 AM
Re: 10.75 x52r Springer finally fired	oldcolonel	21/07/13 10:58 AM
Re: 10.75 x52r Springer finally fired	MikeRowe	21/07/13 12:04 PM
Re: 10.75 x52r Springer finally fired	oldcolonel	21/07/13 01:26 PM
Re: 10.75 x52r Springer finally fired	oldcolonel	21/07/13 01:30 PM
Re: 10.75 x52r Springer finally fired	lancaster	21/07/13 07:00 PM
Re: 10.75 x52r Springer finally fired	oldcolonel	22/07/13 01:34 AM
Re: 10.75 x52r Springer finally fired	DarylS	22/07/13 02:08 AM
Re: 10.75 x52r Springer finally fired	oldcolonel	22/07/13 03:57 AM
Re: 10.75 x52r Springer finally fired	DarylS	23/07/13 12:58 AM
Re: 10.75 x52r Springer finally fired	oldcolonel	23/07/13 01:49 PM
Re: 10.75 x52r Springer finally fired	MikeRowe	21/07/13 02:17 PM

Extra information

4 registered and 816 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 18443

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact