Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: 10.75 x52r Springer finally fired

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifles

oldcolonel
.224 member

Reged: 11/04/13
Posts: 30
Loc: Kansas

Re: 10.75 x52r Springer finally fired
19/07/13 05:13 AM

Sizing the cartridge case is not a problem both the initial die and a Case Forming Die the gun came with resize the 45-70 government case to the correct dimensions in terms of near matching up to the chamber cast I did, matching up to the fire formed cases, and to the spec diagrams I have.

While the expander plug seems oversized, in the end that is an easy work around. I can always hone it down to the right size once I am sure what that is. The problem is the final bullet tension is loose. This is either due to me using too small a bullet or the dies not being made tight enough.

Once I have had an independent and qualified verification of the bore slugs I can move forward.

The current die set I am using is a CH4D set and when I put the case with the 0.423/0.424 bullet into it I get no resistance at all. It appears that both the case and the bullet is smaller than the die. Only the bullet seating cone makes contact with the top of the bullet. I get no resistance from the die at all.

If it turns out to be the die I believe my best course is to send the case with the correct bullet to someone to have them make a die that is correct.

I have to still get a trim die from CH4D so I may have them make me a custom crimp die or something of that sort.

--------------------
old colonel, topeka kansas

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
10.75 x52r Springer finally fired	oldcolonel	17/07/13 04:44 AM
Re: 10.75 x52r Springer finally fired	MikeRowe	17/07/13 08:17 AM
Re: 10.75 x52r Springer finally fired	oldcolonel	17/07/13 11:06 PM
Re: 10.75 x52r Springer finally fired	DarylS	17/07/13 11:57 PM
Re: 10.75 x52r Springer finally fired	Huvius	18/07/13 12:48 AM
Re: 10.75 x52r Springer finally fired	oldcolonel	18/07/13 03:59 AM
Re: 10.75 x52r Springer finally fired	MikeRowe	18/07/13 05:27 AM
Re: 10.75 x52r Springer finally fired	oldcolonel	18/07/13 09:41 AM
Re: 10.75 x52r Springer finally fired	MikeRowe	18/07/13 12:19 PM
Re: 10.75 x52r Springer finally fired	DarylS	19/07/13 12:26 AM
Re: 10.75 x52r Springer finally fired	Huvius	19/07/13 02:06 AM
Re: 10.75 x52r Springer finally fired	oldcolonel	19/07/13 05:13 AM
Re: 10.75 x52r Springer finally fired	DarylS	19/07/13 06:27 AM
Re: 10.75 x52r Springer finally fired	oldcolonel	19/07/13 07:15 AM
Re: 10.75 x52r Springer finally fired	DarylS	19/07/13 02:01 PM
Re: 10.75 x52r Springer finally fired	oldcolonel	20/07/13 01:46 AM
Re: 10.75 x52r Springer finally fired	DarylS	20/07/13 05:55 AM
Re: 10.75 x52r Springer finally fired	aromakr	20/07/13 07:48 AM
Re: 10.75 x52r Springer finally fired	MikeRowe	21/07/13 07:01 AM
Re: 10.75 x52r Springer finally fired	oldcolonel	21/07/13 10:58 AM
Re: 10.75 x52r Springer finally fired	MikeRowe	21/07/13 12:04 PM
Re: 10.75 x52r Springer finally fired	oldcolonel	21/07/13 01:26 PM
Re: 10.75 x52r Springer finally fired	oldcolonel	21/07/13 01:30 PM
Re: 10.75 x52r Springer finally fired	lancaster	21/07/13 07:00 PM
Re: 10.75 x52r Springer finally fired	oldcolonel	22/07/13 01:34 AM
Re: 10.75 x52r Springer finally fired	DarylS	22/07/13 02:08 AM
Re: 10.75 x52r Springer finally fired	oldcolonel	22/07/13 03:57 AM
Re: 10.75 x52r Springer finally fired	DarylS	23/07/13 12:58 AM
Re: 10.75 x52r Springer finally fired	oldcolonel	23/07/13 01:49 PM
Re: 10.75 x52r Springer finally fired	MikeRowe	21/07/13 02:17 PM

Extra information

1 registered and 550 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 17628

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved