Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: 10.75 x52r Springer finally fired

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifles

DarylS
.700 member

Reged: 10/08/05
Posts: 26998
Loc: Beautiful British Columbia, Ca...

Re: 10.75 x52r Springer finally fired
19/07/13 12:26 AM

ha! - Well done oldcolonel.

If the Colonel's #'s are even remotely correct, then the problem is in the dies (expander plug).

If the expander plug is over about .424" or .425", it's oversized and is opening the cases up too large so they cannot possibly hold a bullet properly.

Colonel - you've noted above that the expander plug is .435" - that's .011" ( 11 thousandths ) larger than it should be.

That is why Mike suggested you try sizing the brass without the expander plug and check bullet fit. It could be your dies are properly sizing the brass, but the oversize expander plug is opening them too much.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras

Entire topic
Subject	Posted by	Posted on
10.75 x52r Springer finally fired	oldcolonel	17/07/13 04:44 AM
Re: 10.75 x52r Springer finally fired	MikeRowe	17/07/13 08:17 AM
Re: 10.75 x52r Springer finally fired	oldcolonel	17/07/13 11:06 PM
Re: 10.75 x52r Springer finally fired	DarylS	17/07/13 11:57 PM
Re: 10.75 x52r Springer finally fired	Huvius	18/07/13 12:48 AM
Re: 10.75 x52r Springer finally fired	oldcolonel	18/07/13 03:59 AM
Re: 10.75 x52r Springer finally fired	MikeRowe	18/07/13 05:27 AM
Re: 10.75 x52r Springer finally fired	oldcolonel	18/07/13 09:41 AM
Re: 10.75 x52r Springer finally fired	MikeRowe	18/07/13 12:19 PM
Re: 10.75 x52r Springer finally fired	DarylS	19/07/13 12:26 AM
Re: 10.75 x52r Springer finally fired	Huvius	19/07/13 02:06 AM
Re: 10.75 x52r Springer finally fired	oldcolonel	19/07/13 05:13 AM
Re: 10.75 x52r Springer finally fired	DarylS	19/07/13 06:27 AM
Re: 10.75 x52r Springer finally fired	oldcolonel	19/07/13 07:15 AM
Re: 10.75 x52r Springer finally fired	DarylS	19/07/13 02:01 PM
Re: 10.75 x52r Springer finally fired	oldcolonel	20/07/13 01:46 AM
Re: 10.75 x52r Springer finally fired	DarylS	20/07/13 05:55 AM
Re: 10.75 x52r Springer finally fired	aromakr	20/07/13 07:48 AM
Re: 10.75 x52r Springer finally fired	MikeRowe	21/07/13 07:01 AM
Re: 10.75 x52r Springer finally fired	oldcolonel	21/07/13 10:58 AM
Re: 10.75 x52r Springer finally fired	MikeRowe	21/07/13 12:04 PM
Re: 10.75 x52r Springer finally fired	oldcolonel	21/07/13 01:26 PM
Re: 10.75 x52r Springer finally fired	oldcolonel	21/07/13 01:30 PM
Re: 10.75 x52r Springer finally fired	lancaster	21/07/13 07:00 PM
Re: 10.75 x52r Springer finally fired	oldcolonel	22/07/13 01:34 AM
Re: 10.75 x52r Springer finally fired	DarylS	22/07/13 02:08 AM
Re: 10.75 x52r Springer finally fired	oldcolonel	22/07/13 03:57 AM
Re: 10.75 x52r Springer finally fired	DarylS	23/07/13 12:58 AM
Re: 10.75 x52r Springer finally fired	oldcolonel	23/07/13 01:49 PM
Re: 10.75 x52r Springer finally fired	MikeRowe	21/07/13 02:17 PM

Extra information

1 registered and 614 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 17628

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact