Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: 10.75 x52r Springer finally fired

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifles

DarylS
.700 member

Reged: 10/08/05
Posts: 27009
Loc: Beautiful British Columbia, Ca...

Re: 10.75 x52r Springer finally fired
17/07/13 11:57 PM

Mike was talking about the expander button in the Full Length Sizing die. What diameter is it? If indeed, the expander button is .435" - it is more than .010" LARGER than it should be and needs to be ground down - do as Mike suggested, remove it or skip that stage and measure the case mouth after sizing.

I see from your post, you are guessing at the groove diameter.

You should Slug the bores to determine the exact bore and groove diameter. The bore, is the small measurement - the groove diameter is the "important" number.

Do not increase the diameter of the bullets until you slug the bore.

A soft lead slug is pushed into the bore - run a rod down from the muzzle to the slug, then one up from the breech to the slug. Thump one rod against the slug, holding it still with the other rod, then push it out and measure it with accurate calipers. The bullet should be that diameter or up to about .002" larger.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
10.75 x52r Springer finally fired	oldcolonel	17/07/13 04:44 AM
Re: 10.75 x52r Springer finally fired	MikeRowe	17/07/13 08:17 AM
Re: 10.75 x52r Springer finally fired	oldcolonel	17/07/13 11:06 PM
Re: 10.75 x52r Springer finally fired	DarylS	17/07/13 11:57 PM
Re: 10.75 x52r Springer finally fired	Huvius	18/07/13 12:48 AM
Re: 10.75 x52r Springer finally fired	oldcolonel	18/07/13 03:59 AM
Re: 10.75 x52r Springer finally fired	MikeRowe	18/07/13 05:27 AM
Re: 10.75 x52r Springer finally fired	oldcolonel	18/07/13 09:41 AM
Re: 10.75 x52r Springer finally fired	MikeRowe	18/07/13 12:19 PM
Re: 10.75 x52r Springer finally fired	DarylS	19/07/13 12:26 AM
Re: 10.75 x52r Springer finally fired	Huvius	19/07/13 02:06 AM
Re: 10.75 x52r Springer finally fired	oldcolonel	19/07/13 05:13 AM
Re: 10.75 x52r Springer finally fired	DarylS	19/07/13 06:27 AM
Re: 10.75 x52r Springer finally fired	oldcolonel	19/07/13 07:15 AM
Re: 10.75 x52r Springer finally fired	DarylS	19/07/13 02:01 PM
Re: 10.75 x52r Springer finally fired	oldcolonel	20/07/13 01:46 AM
Re: 10.75 x52r Springer finally fired	DarylS	20/07/13 05:55 AM
Re: 10.75 x52r Springer finally fired	aromakr	20/07/13 07:48 AM
Re: 10.75 x52r Springer finally fired	MikeRowe	21/07/13 07:01 AM
Re: 10.75 x52r Springer finally fired	oldcolonel	21/07/13 10:58 AM
Re: 10.75 x52r Springer finally fired	MikeRowe	21/07/13 12:04 PM
Re: 10.75 x52r Springer finally fired	oldcolonel	21/07/13 01:26 PM
Re: 10.75 x52r Springer finally fired	oldcolonel	21/07/13 01:30 PM
Re: 10.75 x52r Springer finally fired	lancaster	21/07/13 07:00 PM
Re: 10.75 x52r Springer finally fired	oldcolonel	22/07/13 01:34 AM
Re: 10.75 x52r Springer finally fired	DarylS	22/07/13 02:08 AM
Re: 10.75 x52r Springer finally fired	oldcolonel	22/07/13 03:57 AM
Re: 10.75 x52r Springer finally fired	DarylS	23/07/13 12:58 AM
Re: 10.75 x52r Springer finally fired	oldcolonel	23/07/13 01:49 PM
Re: 10.75 x52r Springer finally fired	MikeRowe	21/07/13 02:17 PM

Extra information

0 registered and 849 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 17646

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved