Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Loads for the 9,3x74R

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifles

NE450No2
.375 member

Reged: 10/01/03
Posts: 942

Re: Loads for the 9,3x74R
03/01/05 10:51 AM

First, I would NEVER load higher pressure loads in a double.
When I first started loading for my Chapuis I tried IMR 3031 because I had a lot on hand. The loads crossed. I went to RL 15 and IMR 4831. The loads did not cross.
59 grains of RL 15 and 270 Speers shoot very good in my rifle.
65 grains of IMR 4831 with 286 grain bullets shoots very good, to 300 yards in my rifle.
Before I did any re-regulating, I would try a different powder.
I think 286 grain bullets are the best all round choice for the 9,3. I would be happy using the Nosler partition or the Woodleigh Soft point.
Try a different powder, one a little slower.

Post Extras

Entire topic
Subject	Posted by	Posted on
Loads for the 9,3x74R	shatter	02/01/05 07:50 AM
Re: Loads for the 9,3x74R	lapsub	11/02/05 10:35 AM
Re: Loads for the 9,3x74R	butchloc	04/01/05 08:23 AM
Re: Loads for the 9,3x74R	NE450No2	02/01/05 09:02 AM
Re: Loads for the 9,3x74R	shatter	02/01/05 09:43 AM
Re: Loads for the 9,3x74R	NE450No2	02/01/05 10:29 AM
Re: Loads for the 9,3x74R	shatter	03/01/05 12:56 AM
Re: Loads for the 9,3x74R	shatter	03/01/05 09:23 AM
Re: Loads for the 9,3x74R	NE450No2	03/01/05 10:51 AM
Re: Loads for the 9,3x74R	shatter	31/01/05 12:25 AM
Re: Loads for the 9,3x74R	seroadglide	03/01/05 11:23 AM

Extra information

2 registered and 603 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 8146

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact