Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Newbie questions about MS1910 (9,5x57MS)

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

kumpe
.224 member

Reged: 18/04/13
Posts: 11
Loc: Sweden

Re: Newbie questions about MS1910 (9,5x57MS)
07/06/13 04:58 PM

Kiwi_bloke: Yes, 2000 Ft/s is OK, but if I'm not mistaken Hornady recommends 2000 Ft/s as minimum for the Interlock 270 grain RN, and I have a feeling I'm well below that at 100 yards out or so. I'm not expecting too much, but getting up towards 2150 would be nice.
And yes, you shouldn't need to force open the bolt at that speed, but I'm now convinced that it's the welding damage that causes this. Will try to even out some of the worst spots in the chamber myself during the weekend.
A lighter bullet could also be an option if I can find one that works. My rifle is one of the ones you mentioned that cannot feed pointed bullets. The magazine locks up completely and has to be taken apart to even get them out.
One thing is clear, the rifle is not going anywhere, it's staying in the family. Too bad though that our crappy gunlaws here in Sweden severely limits the amount of guns you can own. You really don't want a rifle taking up a place in your gun cabinet if you can't use it...

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Newbie questions about MS1910 (9,5x57MS)	kumpe	03/06/13 06:01 AM
Re: Newbie questions about MS1910 (9,5x57MS)	xausa	29/10/13 06:23 AM
Re: Newbie questions about MS1910 (9,5x57MS)	kumpe	29/10/13 07:55 AM
Re: Newbie questions about MS1910 (9,5x57MS)	Igorrock	03/06/13 06:27 AM
Re: Newbie questions about MS1910 (9,5x57MS)	kumpe	03/06/13 06:48 AM
Re: Newbie questions about MS1910 (9,5x57MS)	HendrikNZ	03/06/13 06:59 AM
Re: Newbie questions about MS1910 (9,5x57MS)	DarylS	03/06/13 08:16 AM
Re: Newbie questions about MS1910 (9,5x57MS)	pondoro62	03/06/13 09:45 AM
Re: Newbie questions about MS1910 (9,5x57MS)	Marrakai	04/06/13 12:08 AM
Re: Newbie questions about MS1910 (9,5x57MS)	kumpe	04/06/13 03:56 AM
Re: Newbie questions about MS1910 (9,5x57MS)	DarylS	04/06/13 04:41 AM
Re: Newbie questions about MS1910 (9,5x57MS)	kumpe	04/06/13 04:56 AM
Re: Newbie questions about MS1910 (9,5x57MS)	DarylS	05/06/13 12:21 AM
Re: Newbie questions about MS1910 (9,5x57MS)	kumpe	05/06/13 02:35 AM
Re: Newbie questions about MS1910 (9,5x57MS)	DarylS	03/09/13 02:17 AM
Re: Newbie questions about MS1910 (9,5x57MS)	kuduae	03/09/13 04:18 AM
Re: Newbie questions about MS1910 (9,5x57MS)	kumpe	28/10/13 06:14 AM
Re: Newbie questions about MS1910 (9,5x57MS)	Kiwi_bloke	06/06/13 06:59 AM
MS1910 (9,5x57MS)	Brento	02/09/13 09:10 PM
Re: MS1910 (9,5x57MS)	DonZ	02/09/13 10:53 PM
Re: Newbie questions about MS1910 (9,5x57MS)	kumpe	07/06/13 04:58 PM

Extra information

1 registered and 64 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 10739

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved