Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Newbie questions about MS1910 (9,5x57MS)

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

kumpe
.224 member

Reged: 18/04/13
Posts: 11
Loc: Sweden

Re: Newbie questions about MS1910 (9,5x57MS)
05/06/13 02:35 AM

Daryl S: The bulge I'm talking about doesn't go all the way around the case, it's more of a "bump", so I don't think it's caused by normal case expansion. Also, the bulge and indentation is both the same distance from the base, on the same half of the case if you understand what I mean.
And after finding some better tools to examine the chamber I found some really ugly scratches and markings near the entrance of the chamber that seems to fit the pattern on the fired cases.

To answer you other questions; yes, loaded ammunition chambers without problem, fired brass does not, unless speed was below 1900fps.

Anyway, I have decided to find a capable gunsmith to even out the chamber before I go any further, it feels like this rifle is worth the time and money.
Thank you all for your answers!

Post Extras

Entire topic
Subject	Posted by	Posted on
Newbie questions about MS1910 (9,5x57MS)	kumpe	03/06/13 06:01 AM
Re: Newbie questions about MS1910 (9,5x57MS)	xausa	29/10/13 06:23 AM
Re: Newbie questions about MS1910 (9,5x57MS)	kumpe	29/10/13 07:55 AM
Re: Newbie questions about MS1910 (9,5x57MS)	Igorrock	03/06/13 06:27 AM
Re: Newbie questions about MS1910 (9,5x57MS)	kumpe	03/06/13 06:48 AM
Re: Newbie questions about MS1910 (9,5x57MS)	HendrikNZ	03/06/13 06:59 AM
Re: Newbie questions about MS1910 (9,5x57MS)	DarylS	03/06/13 08:16 AM
Re: Newbie questions about MS1910 (9,5x57MS)	pondoro62	03/06/13 09:45 AM
Re: Newbie questions about MS1910 (9,5x57MS)	Marrakai	04/06/13 12:08 AM
Re: Newbie questions about MS1910 (9,5x57MS)	kumpe	04/06/13 03:56 AM
Re: Newbie questions about MS1910 (9,5x57MS)	DarylS	04/06/13 04:41 AM
Re: Newbie questions about MS1910 (9,5x57MS)	kumpe	04/06/13 04:56 AM
Re: Newbie questions about MS1910 (9,5x57MS)	DarylS	05/06/13 12:21 AM
Re: Newbie questions about MS1910 (9,5x57MS)	kumpe	05/06/13 02:35 AM
Re: Newbie questions about MS1910 (9,5x57MS)	DarylS	03/09/13 02:17 AM
Re: Newbie questions about MS1910 (9,5x57MS)	kuduae	03/09/13 04:18 AM
Re: Newbie questions about MS1910 (9,5x57MS)	kumpe	28/10/13 06:14 AM
Re: Newbie questions about MS1910 (9,5x57MS)	Kiwi_bloke	06/06/13 06:59 AM
MS1910 (9,5x57MS)	Brento	02/09/13 09:10 PM
Re: MS1910 (9,5x57MS)	DonZ	02/09/13 10:53 PM
Re: Newbie questions about MS1910 (9,5x57MS)	kumpe	07/06/13 04:58 PM

Extra information

0 registered and 49 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 11283

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact