Home | Ezine | Forums | Links | Contact
NitroExpress.com: Newbie questions about MS1910 (9,5x57MS)

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

DarylS
.700 member


Reged: 10/08/05
Posts: 26992
Loc: Beautiful British Columbia, Ca...
Re: Newbie questions about MS1910 (9,5x57MS)
      04/06/13 04:41 AM

No Dremel!!!!!!
Does one of these 'tight' cases have a 'bright' spot on it.

One other cause of chamber problems can be if the bridge is drilled and tapped with the hole being too deep and either protruding into the chamber or pushing thin metal into the chamber, then it reverses when a round is fired, creating a divot in the chamber wall. If there is a bright spot showing this, have a close look at the top surface of the chamber. You may have to take the barreled action off the stock to check this.

As Marrakai says, protruding primers or case head separation ONLY happens with a headspace problem - either the brass or chamber is at fault.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Newbie questions about MS1910 (9,5x57MS) kumpe 03/06/13 06:01 AM
. * * Re: Newbie questions about MS1910 (9,5x57MS) xausa   29/10/13 06:23 AM
. * * Re: Newbie questions about MS1910 (9,5x57MS) kumpe   29/10/13 07:55 AM
. * * Re: Newbie questions about MS1910 (9,5x57MS) Igorrock   03/06/13 06:27 AM
. * * Re: Newbie questions about MS1910 (9,5x57MS) kumpe   03/06/13 06:48 AM
. * * Re: Newbie questions about MS1910 (9,5x57MS) HendrikNZ   03/06/13 06:59 AM
. * * Re: Newbie questions about MS1910 (9,5x57MS) DarylS   03/06/13 08:16 AM
. * * Re: Newbie questions about MS1910 (9,5x57MS) pondoro62   03/06/13 09:45 AM
. * * Re: Newbie questions about MS1910 (9,5x57MS) Marrakai   04/06/13 12:08 AM
. * * Re: Newbie questions about MS1910 (9,5x57MS) kumpe   04/06/13 03:56 AM
. * * Re: Newbie questions about MS1910 (9,5x57MS) DarylS   04/06/13 04:41 AM
. * * Re: Newbie questions about MS1910 (9,5x57MS) kumpe   04/06/13 04:56 AM
. * * Re: Newbie questions about MS1910 (9,5x57MS) DarylS   05/06/13 12:21 AM
. * * Re: Newbie questions about MS1910 (9,5x57MS) kumpe   05/06/13 02:35 AM
. * * Re: Newbie questions about MS1910 (9,5x57MS) DarylS   03/09/13 02:17 AM
. * * Re: Newbie questions about MS1910 (9,5x57MS) kuduae   03/09/13 04:18 AM
. * * Re: Newbie questions about MS1910 (9,5x57MS) kumpe   28/10/13 06:14 AM
. * * Re: Newbie questions about MS1910 (9,5x57MS) Kiwi_bloke   06/06/13 06:59 AM
. * * MS1910 (9,5x57MS) Brento   02/09/13 09:10 PM
. * * Re: MS1910 (9,5x57MS) DonZ   02/09/13 10:53 PM
. * * Re: Newbie questions about MS1910 (9,5x57MS) kumpe   07/06/13 04:58 PM

Extra information
0 registered and 118 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 11273

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved