Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Newbie questions about MS1910 (9,5x57MS)

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

Marrakai
.416 member

Reged: 09/01/03
Posts: 3490
Loc: Darwin, Top End of Australia

Re: Newbie questions about MS1910 (9,5x57MS)
04/06/13 12:08 AM

kumpe:
Might we inquire as to the barrel length of your 1910 ?
You stated it is full-wood stock, does this mean a carbine?
Short barrels might sacrifice 150fps or more compared with the velocities quoted by others above.
My 1903 carbine with 17.7 inch barrel shoots the 160gr 6.5mm bullet at ~1980 fps with factory-equivalent loads, well below the velocity quoted for the rifle.

Also, finding a gunsmith with a 9.5x57 finishing reamer, and giving the chamber a quick tidy-up is a potential fix. It is possible that only a small high-spot could cause stiff extraction.
If it was mine, I wouldn't hesitate to polish-out the chamber with a "flapper" on an electric drill or dremel. Baby-steps though, can't put that metal back!

The cartridge-case separation mentioned above is likely to be from excess headspace, I have found this not to be uncommon in the MS. Protruding primers after firing (on the cases that don't separate) is a give-away. The easy fix for a hand-loader is to neck-expand up to ~10mm with a tapered expander, then push a new shoulder down with the 9.5 sizing die but stopping short of the old shoulder position. Trial and error with the first couple of cases to give a very slight resistance when closing the bolt will determine the new shoulder position. Then load them up and fire-form with full loads. Neck-anneal, then neck-size-only for subsequent reloads, but be prepared to push the shoulders down slightly again when chambering resistance begins to occur.

Bit long-winded, apologies. Hope this info is of some use.

Love the 1910 9.5 Mannlicher, been having quite a bit of fun in the field with mine...

--------------------
Marrakai
When the bull drops, the bullshit stops!
--------------------------------
www.marrakai-adventure.com.au

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Newbie questions about MS1910 (9,5x57MS)	kumpe	03/06/13 06:01 AM
Re: Newbie questions about MS1910 (9,5x57MS)	xausa	29/10/13 06:23 AM
Re: Newbie questions about MS1910 (9,5x57MS)	kumpe	29/10/13 07:55 AM
Re: Newbie questions about MS1910 (9,5x57MS)	Igorrock	03/06/13 06:27 AM
Re: Newbie questions about MS1910 (9,5x57MS)	kumpe	03/06/13 06:48 AM
Re: Newbie questions about MS1910 (9,5x57MS)	HendrikNZ	03/06/13 06:59 AM
Re: Newbie questions about MS1910 (9,5x57MS)	DarylS	03/06/13 08:16 AM
Re: Newbie questions about MS1910 (9,5x57MS)	pondoro62	03/06/13 09:45 AM
Re: Newbie questions about MS1910 (9,5x57MS)	Marrakai	04/06/13 12:08 AM
Re: Newbie questions about MS1910 (9,5x57MS)	kumpe	04/06/13 03:56 AM
Re: Newbie questions about MS1910 (9,5x57MS)	DarylS	04/06/13 04:41 AM
Re: Newbie questions about MS1910 (9,5x57MS)	kumpe	04/06/13 04:56 AM
Re: Newbie questions about MS1910 (9,5x57MS)	DarylS	05/06/13 12:21 AM
Re: Newbie questions about MS1910 (9,5x57MS)	kumpe	05/06/13 02:35 AM
Re: Newbie questions about MS1910 (9,5x57MS)	DarylS	03/09/13 02:17 AM
Re: Newbie questions about MS1910 (9,5x57MS)	kuduae	03/09/13 04:18 AM
Re: Newbie questions about MS1910 (9,5x57MS)	kumpe	28/10/13 06:14 AM
Re: Newbie questions about MS1910 (9,5x57MS)	Kiwi_bloke	06/06/13 06:59 AM
MS1910 (9,5x57MS)	Brento	02/09/13 09:10 PM
Re: MS1910 (9,5x57MS)	DonZ	02/09/13 10:53 PM
Re: Newbie questions about MS1910 (9,5x57MS)	kumpe	07/06/13 04:58 PM

Extra information

1 registered and 40 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 10641

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved