Home | Ezine | Forums | Links | Contact
NitroExpress.com: Cleaning rods ,guides for big bores

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

atkinson6
.375 member


Reged: 26/01/04
Posts: 678
Loc: Idaho
Re: Cleaning rods ,guides for big bores
      01/01/05 06:58 AM

For a bore guide for any caliber, take a fired case drill out the primer hole and push and glass a 10 inch section or aluminum arrow shaft in the primer hole (push it in to the shoulder) and you have an excellent bore guide for any caliber..I have a coffee can full of these...Take out the bolt and push the case into the chamber and your set with a perfect mating to the chamber and throat.

You can even cut a slot in the arrow shaft about half way and use that to oil a patch..I just put a towell or piece of whatever over the butt stock so the run off from pushing a wet patch into the shaft doesn't drip on the stock finish....

Cheap and efficient...



Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Cleaning rods ,guides for big bores cr500 19/12/04 10:18 PM
. * * Re: Cleaning rods ,guides for big bores mikeh416Rigby   20/12/04 12:24 AM
. * * Re: Cleaning rods ,guides for big bores cr500   20/12/04 11:34 AM
. * * Re: Cleaning rods ,guides for big bores 4seventy   20/12/04 10:44 PM
. * * Re: Cleaning rods ,guides for big bores cr500   21/12/04 09:44 PM
. * * Re: Cleaning rods ,guides for big bores Arctic   22/12/04 07:14 PM
. * * Re: Cleaning rods ,guides for big bores atkinson6   01/01/05 06:58 AM
. * * Re: Cleaning rods ,guides for big bores cr500   03/01/05 11:49 AM
. * * Re: Cleaning rods ,guides for big bores mikeh416Rigby   20/12/04 12:09 PM
. * * Re: Cleaning rods ,guides for big bores cr500   20/12/04 11:18 AM

Extra information
1 registered and 37 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2018

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved