Home | Ezine | Forums | Links | Contact
NitroExpress.com: My new regulation jig.

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

Ron_Vella
.333 member


Reged: 29/04/05
Posts: 432
Loc: Oshawa, Ontario, Canada
My new regulation jig.
      15/05/13 11:19 AM

Ever since I started building double rifles, I've wanted a set-up that would give very precise adjustments and repeatability. I thought up this jig while hunting turkeys last week. I think that the photos will explain most of it. I started with a 1"x1"x6" piece of cold-rolled, milled a slot for the micrometers and gibs, and drilled holes for set screws. I went to the local cut-rate machine tool store and bought two 0-1" micrometers for $16.50 each. I hack-sawed off the anvil end of each and milled away some of the body in order to let them sit lower in the slot. This setup works even better than I had hoped for and allows adjustments of as little as .0005 if needed.








Edited by CptCurl (15/05/13 08:55 PM)

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* My new regulation jig. Ron_Vella 15/05/13 11:19 AM
. * * Re: My new regulation jig. Huvius   15/05/13 11:30 AM
. * * Re: My new regulation jig. 500Nitro   15/05/13 11:33 AM
. * * Re: My new regulation jig. gallatin   15/05/13 04:14 PM
. * * Re: My new regulation jig. Rhodes   15/05/13 08:24 PM
. * * Re: My new regulation jig. 4al2   18/05/13 02:40 PM
. * * Re: My new regulation jig. doubleriflejack   05/06/13 04:41 AM
. * * Re: My new regulation jig. Ron_Vella   05/06/13 12:51 PM
. * * Re: My new regulation jig. doubleriflejack   06/06/13 03:49 AM
. * * Re: My new regulation jig. felix   07/06/13 06:35 AM
. * * Re: My new regulation jig. felix   07/06/13 06:36 AM
. * * Re: My new regulation jig. Ron_Vella   07/06/13 11:23 AM

Extra information
0 registered and 3 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 3706

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved