Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: .423" lube sizer dies to suit .404 Jeffery

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Cast Bullets

VonGruff
.400 member

Reged: 08/02/09
Posts: 1119
Loc: South Otago, New Zealand.

Re: .423" lube sizer dies to suit .404 Jeffery
04/05/13 08:29 AM

I believe that many of the 404 shooters are using the ultra mag case to fire form back to 404 for thier plinkin loads.
As far as Hock moulds go, mine at least was a custom mould but I believe they keep the mould data on hand because I have sent some of my bullets to a couple of other 404 shooters and they have had a mould made as well using the ID numbers from my mould. When I sent my data I stipulated the weight and the mould was made to give the required weight. By asking for a 400gn weight with straight ww then lengthened drive bands would more than likely get you there as 50 gn is not much to pick up in weight. I know I get 10-15 gn just by adding Pb to my alloy.

--------------------
Von Gruff.

Exodus 20:1-17

Acts 4:10-12

Edited by VonGruff (04/05/13 08:31 AM)

Post Extras

Entire topic
Subject	Posted by	Posted on
.423" lube sizer dies to suit .404 Jeffery	93x64mm	22/04/13 10:03 PM
Re: .423" lube sizer dies to suit .404 Jeffery	VonGruff	26/04/13 04:36 PM
Re: .423" lube sizer dies to suit .404 Jeffery	eagle27	27/04/13 07:11 AM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	28/04/13 07:53 AM
Re: .423" lube sizer dies to suit .404 Jeffery	VonGruff	28/04/13 09:12 AM
Re: .423" lube sizer dies to suit .404 Jeffery	eagle27	28/04/13 04:09 PM
Re: .423" lube sizer dies to suit .404 Jeffery	VonGruff	28/04/13 05:15 PM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	28/04/13 09:20 PM
Re: .423" lube sizer dies to suit .404 Jeffery	VonGruff	29/04/13 07:16 AM
Re: .423" lube sizer dies to suit .404 Jeffery	eagle27	29/04/13 04:38 PM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	29/04/13 09:14 PM
Re: .423" lube sizer dies to suit .404 Jeffery	Spud303	02/05/13 06:11 PM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	02/05/13 10:49 PM
Re: .423" lube sizer dies to suit .404 Jeffery	VonGruff	03/05/13 06:55 AM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	03/05/13 09:01 PM
Re: .423" lube sizer dies to suit .404 Jeffery	VonGruff	04/05/13 08:29 AM
Re: .423" lube sizer dies to suit .404 Jeffery	eagle27	05/05/13 06:38 PM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	05/05/13 09:30 PM
Re: .423" lube sizer dies to suit .404 Jeffery	VonGruff	06/05/13 10:13 AM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	06/05/13 09:38 PM
Re: .423" lube sizer dies to suit .404 Jeffery	JFE	11/05/13 10:03 AM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	11/05/13 01:34 PM
Re: .423" lube sizer dies to suit .404 Jeffery	Homer	27/07/13 09:38 AM
Re: .423" lube sizer dies to suit .404 Jeffery	eagleyes	27/07/13 10:00 AM
Re: .423" lube sizer dies to suit .404 Jeffery	eagleyes	27/07/13 07:54 PM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	28/07/13 08:22 AM
Re: .423" lube sizer dies to suit .404 Jeffery	Homer	28/07/13 10:04 AM

Extra information

0 registered and 19 anonymous users are browsing this forum.

Moderator: DarylS

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 15721

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact