Home | Ezine | Forums | Links | Contact
NitroExpress.com: .423" lube sizer dies to suit .404 Jeffery

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Cast Bullets

VonGruff
.400 member


Reged: 08/02/09
Posts: 1119
Loc: South Otago, New Zealand.
Re: .423" lube sizer dies to suit .404 Jeffery
      03/05/13 06:55 AM

If you have an energy requirment that needs the 400gn bullet at 2100fps then I presume that 3916 is suficient according to this calculater
http://www.handloads.com/calc/quick.asp
If I put in the figures for my 350gn bullet at 2363fps I get 4338ft/lb energy and if I go further and use the ht 90/10 that I ran to 2415fps with 87gn 2209 then the energy figure raises to 4531ft/lb
That makes the 400gn at 2100 fps quite a light load and so getting to the required energy figures with my 350gn bullet would be quite simple.
Hock mould 06610 425 345 to my design on 5-18-08.
I would not hesitate to use this bullet on a buff as the chambered round but might have some of my woodies under it to follow if necessary.

--------------------
Von Gruff.

Exodus 20:1-17

Acts 4:10-12

Edited by VonGruff (03/05/13 06:58 AM)

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* .423" lube sizer dies to suit .404 Jeffery 93x64mm 22/04/13 10:03 PM
. * * Re: .423" lube sizer dies to suit .404 Jeffery VonGruff   26/04/13 04:36 PM
. * * Re: .423" lube sizer dies to suit .404 Jeffery eagle27   27/04/13 07:11 AM
. * * Re: .423" lube sizer dies to suit .404 Jeffery 93x64mm   28/04/13 07:53 AM
. * * Re: .423" lube sizer dies to suit .404 Jeffery VonGruff   28/04/13 09:12 AM
. * * Re: .423" lube sizer dies to suit .404 Jeffery eagle27   28/04/13 04:09 PM
. * * Re: .423" lube sizer dies to suit .404 Jeffery VonGruff   28/04/13 05:15 PM
. * * Re: .423" lube sizer dies to suit .404 Jeffery 93x64mm   28/04/13 09:20 PM
. * * Re: .423" lube sizer dies to suit .404 Jeffery VonGruff   29/04/13 07:16 AM
. * * Re: .423" lube sizer dies to suit .404 Jeffery eagle27   29/04/13 04:38 PM
. * * Re: .423" lube sizer dies to suit .404 Jeffery 93x64mm   29/04/13 09:14 PM
. * * Re: .423" lube sizer dies to suit .404 Jeffery Spud303   02/05/13 06:11 PM
. * * Re: .423" lube sizer dies to suit .404 Jeffery 93x64mm   02/05/13 10:49 PM
. * * Re: .423" lube sizer dies to suit .404 Jeffery VonGruff   03/05/13 06:55 AM
. * * Re: .423" lube sizer dies to suit .404 Jeffery 93x64mm   03/05/13 09:01 PM
. * * Re: .423" lube sizer dies to suit .404 Jeffery VonGruff   04/05/13 08:29 AM
. * * Re: .423" lube sizer dies to suit .404 Jeffery eagle27   05/05/13 06:38 PM
. * * Re: .423" lube sizer dies to suit .404 Jeffery 93x64mm   05/05/13 09:30 PM
. * * Re: .423" lube sizer dies to suit .404 Jeffery VonGruff   06/05/13 10:13 AM
. * * Re: .423" lube sizer dies to suit .404 Jeffery 93x64mm   06/05/13 09:38 PM
. * * Re: .423" lube sizer dies to suit .404 Jeffery JFE   11/05/13 10:03 AM
. * * Re: .423" lube sizer dies to suit .404 Jeffery 93x64mm   11/05/13 01:34 PM
. * * Re: .423" lube sizer dies to suit .404 Jeffery Homer   27/07/13 09:38 AM
. * * Re: .423" lube sizer dies to suit .404 Jeffery eagleyes   27/07/13 10:00 AM
. * * Re: .423" lube sizer dies to suit .404 Jeffery eagleyes   27/07/13 07:54 PM
. * * Re: .423" lube sizer dies to suit .404 Jeffery 93x64mm   28/07/13 08:22 AM
. * * Re: .423" lube sizer dies to suit .404 Jeffery Homer   28/07/13 10:04 AM

Extra information
0 registered and 51 anonymous users are browsing this forum.

Moderator:  DarylS 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 14767

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved