Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: .423" lube sizer dies to suit .404 Jeffery

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Cast Bullets

VonGruff
.400 member

Reged: 08/02/09
Posts: 1119
Loc: South Otago, New Zealand.

Re: .423" lube sizer dies to suit .404 Jeffery
28/04/13 09:12 AM

I had a mould made by Hoch to cast a 350gn bullet at .4245 and I size to .424. Of course the more Pb in the mix the heavier it is and the 50/50 (ww/Pb) bullet drops at closer to 375gn. I have used from heat treated 90/10 (ww/lino) over 87gn 2209 for 2416fps (88gn 2437), straight lino over 83gn 2209 for 2300fps and exceptional accuracy and 74gn 2208 for exceptable accuracy and 2365fps.
50/50 (ww/Pb) over 63gn 2209 for 1900fps is the accuracy champ and a 50/50 (ww/Pb)over 21gn Red Dot is a great plinker. All except the plinker use cu GC while the plinker uses my own made Al gc. All load testing at 55 yds with aperture sights. A 70/30 mix of ww/lino at about 15-16 BHN would make a good alloy for the heavier boddied animals but the 50/50 (63gn 2209) at 1900 would still make a good 100-150 yds killer and even my 50/50 bullet plinker load at 1500fps has bought a number of goats to the deck.

Edited by CptCurl (19/05/13 09:36 PM)

Post Extras

Entire topic
Subject	Posted by	Posted on
.423" lube sizer dies to suit .404 Jeffery	93x64mm	22/04/13 10:03 PM
Re: .423" lube sizer dies to suit .404 Jeffery	VonGruff	26/04/13 04:36 PM
Re: .423" lube sizer dies to suit .404 Jeffery	eagle27	27/04/13 07:11 AM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	28/04/13 07:53 AM
Re: .423" lube sizer dies to suit .404 Jeffery	VonGruff	28/04/13 09:12 AM
Re: .423" lube sizer dies to suit .404 Jeffery	eagle27	28/04/13 04:09 PM
Re: .423" lube sizer dies to suit .404 Jeffery	VonGruff	28/04/13 05:15 PM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	28/04/13 09:20 PM
Re: .423" lube sizer dies to suit .404 Jeffery	VonGruff	29/04/13 07:16 AM
Re: .423" lube sizer dies to suit .404 Jeffery	eagle27	29/04/13 04:38 PM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	29/04/13 09:14 PM
Re: .423" lube sizer dies to suit .404 Jeffery	Spud303	02/05/13 06:11 PM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	02/05/13 10:49 PM
Re: .423" lube sizer dies to suit .404 Jeffery	VonGruff	03/05/13 06:55 AM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	03/05/13 09:01 PM
Re: .423" lube sizer dies to suit .404 Jeffery	VonGruff	04/05/13 08:29 AM
Re: .423" lube sizer dies to suit .404 Jeffery	eagle27	05/05/13 06:38 PM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	05/05/13 09:30 PM
Re: .423" lube sizer dies to suit .404 Jeffery	VonGruff	06/05/13 10:13 AM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	06/05/13 09:38 PM
Re: .423" lube sizer dies to suit .404 Jeffery	JFE	11/05/13 10:03 AM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	11/05/13 01:34 PM
Re: .423" lube sizer dies to suit .404 Jeffery	Homer	27/07/13 09:38 AM
Re: .423" lube sizer dies to suit .404 Jeffery	eagleyes	27/07/13 10:00 AM
Re: .423" lube sizer dies to suit .404 Jeffery	eagleyes	27/07/13 07:54 PM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	28/07/13 08:22 AM
Re: .423" lube sizer dies to suit .404 Jeffery	Homer	28/07/13 10:04 AM

Extra information

0 registered and 42 anonymous users are browsing this forum.

Moderator: DarylS

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 14767

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact