Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: .423" lube sizer dies to suit .404 Jeffery

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Cast Bullets

93x64mm
.416 member

Reged: 07/12/11
Posts: 4210
Loc: Nth QLD Australia

Re: .423" lube sizer dies to suit .404 Jeffery
28/04/13 07:53 AM

Eagle27 & VonGruff
Thanks gents for the insight - I thought that's what would be done. Seems strange that we have no "generic" sizing dies by LYMAN's etc for the .404!
What alloy are you lot running for your cast bullets for your .404's?
At present I'm getting a hunting mate of mine to chase up Jim at Cast Bullet Engineering here in Oz to see what he can do for me in regards to the moulds, dies etc. I haven't slugged the bore yet of the CZ but will have to before getting my moulds - hence the alloy question for minimal sizing!
One other question gentleman, if I may? Can you add here your .404 loads both reduced & full loads if you can please?
Kind regards
93x64mm

Post Extras

Entire topic
Subject	Posted by	Posted on
.423" lube sizer dies to suit .404 Jeffery	93x64mm	22/04/13 10:03 PM
Re: .423" lube sizer dies to suit .404 Jeffery	VonGruff	26/04/13 04:36 PM
Re: .423" lube sizer dies to suit .404 Jeffery	eagle27	27/04/13 07:11 AM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	28/04/13 07:53 AM
Re: .423" lube sizer dies to suit .404 Jeffery	VonGruff	28/04/13 09:12 AM
Re: .423" lube sizer dies to suit .404 Jeffery	eagle27	28/04/13 04:09 PM
Re: .423" lube sizer dies to suit .404 Jeffery	VonGruff	28/04/13 05:15 PM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	28/04/13 09:20 PM
Re: .423" lube sizer dies to suit .404 Jeffery	VonGruff	29/04/13 07:16 AM
Re: .423" lube sizer dies to suit .404 Jeffery	eagle27	29/04/13 04:38 PM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	29/04/13 09:14 PM
Re: .423" lube sizer dies to suit .404 Jeffery	Spud303	02/05/13 06:11 PM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	02/05/13 10:49 PM
Re: .423" lube sizer dies to suit .404 Jeffery	VonGruff	03/05/13 06:55 AM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	03/05/13 09:01 PM
Re: .423" lube sizer dies to suit .404 Jeffery	VonGruff	04/05/13 08:29 AM
Re: .423" lube sizer dies to suit .404 Jeffery	eagle27	05/05/13 06:38 PM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	05/05/13 09:30 PM
Re: .423" lube sizer dies to suit .404 Jeffery	VonGruff	06/05/13 10:13 AM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	06/05/13 09:38 PM
Re: .423" lube sizer dies to suit .404 Jeffery	JFE	11/05/13 10:03 AM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	11/05/13 01:34 PM
Re: .423" lube sizer dies to suit .404 Jeffery	Homer	27/07/13 09:38 AM
Re: .423" lube sizer dies to suit .404 Jeffery	eagleyes	27/07/13 10:00 AM
Re: .423" lube sizer dies to suit .404 Jeffery	eagleyes	27/07/13 07:54 PM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	28/07/13 08:22 AM
Re: .423" lube sizer dies to suit .404 Jeffery	Homer	28/07/13 10:04 AM

Extra information

0 registered and 44 anonymous users are browsing this forum.

Moderator: DarylS

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 14767

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact