Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: .423" lube sizer dies to suit .404 Jeffery

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Cast Bullets

93x64mm
.416 member

Reged: 07/12/11
Posts: 4204
Loc: Nth QLD Australia

.423" lube sizer dies to suit .404 Jeffery
22/04/13 10:03 PM

Folks, I have acquired a .404 CZ550 recently & would like to do some casting to ease costs a little. In the shop at present getting the trigger redone & bedded - none what so ever on Safari classics here in Oz. We seem to be the poor cousins over here, & I'm not the only one to have this issue!
Firstly where can i get here in Oz a Lyman/RCBS type sizing die for a .423" projectile?
Do I get a .417" one & rebore to suit say .001" oversize with a new inner or use a Lee type push through type - if we can get them sent out?
Also single cavity moulds, can we get these here in .423" from CBE in 400gn+ - any ideas on cost if they can?
Finally if using a gascheck type projectile would Lymans No2 or "hardball" be OK to use if pushed to 2150fps+
Still waiting on dies & cases.....luckily not holding my breath!
ANy help would be appreciated
93x64mm

Post Extras

Entire topic
Subject	Posted by	Posted on
.423" lube sizer dies to suit .404 Jeffery	93x64mm	22/04/13 10:03 PM
Re: .423" lube sizer dies to suit .404 Jeffery	VonGruff	26/04/13 04:36 PM
Re: .423" lube sizer dies to suit .404 Jeffery	eagle27	27/04/13 07:11 AM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	28/04/13 07:53 AM
Re: .423" lube sizer dies to suit .404 Jeffery	VonGruff	28/04/13 09:12 AM
Re: .423" lube sizer dies to suit .404 Jeffery	eagle27	28/04/13 04:09 PM
Re: .423" lube sizer dies to suit .404 Jeffery	VonGruff	28/04/13 05:15 PM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	28/04/13 09:20 PM
Re: .423" lube sizer dies to suit .404 Jeffery	VonGruff	29/04/13 07:16 AM
Re: .423" lube sizer dies to suit .404 Jeffery	eagle27	29/04/13 04:38 PM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	29/04/13 09:14 PM
Re: .423" lube sizer dies to suit .404 Jeffery	Spud303	02/05/13 06:11 PM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	02/05/13 10:49 PM
Re: .423" lube sizer dies to suit .404 Jeffery	VonGruff	03/05/13 06:55 AM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	03/05/13 09:01 PM
Re: .423" lube sizer dies to suit .404 Jeffery	VonGruff	04/05/13 08:29 AM
Re: .423" lube sizer dies to suit .404 Jeffery	eagle27	05/05/13 06:38 PM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	05/05/13 09:30 PM
Re: .423" lube sizer dies to suit .404 Jeffery	VonGruff	06/05/13 10:13 AM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	06/05/13 09:38 PM
Re: .423" lube sizer dies to suit .404 Jeffery	JFE	11/05/13 10:03 AM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	11/05/13 01:34 PM
Re: .423" lube sizer dies to suit .404 Jeffery	Homer	27/07/13 09:38 AM
Re: .423" lube sizer dies to suit .404 Jeffery	eagleyes	27/07/13 10:00 AM
Re: .423" lube sizer dies to suit .404 Jeffery	eagleyes	27/07/13 07:54 PM
Re: .423" lube sizer dies to suit .404 Jeffery	93x64mm	28/07/13 08:22 AM
Re: .423" lube sizer dies to suit .404 Jeffery	Homer	28/07/13 10:04 AM

Extra information

0 registered and 50 anonymous users are browsing this forum.

Moderator: DarylS

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 14755

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact