Home | Ezine | Forums | Links | Contact
NitroExpress.com: 350 gr. 375 H&H

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

BFaucett
.333 member


Reged: 13/01/04
Posts: 472
Loc: Houston, Texas
Re: 350 gr. 375 H&H
      31/12/04 03:33 AM

Below is the .375 H&H load data for the 350gr Barnes Original bullet taken from the old Barnes Reloading Manual Number One. The Barnes Original is a lead core "cup and core" bullet. Of course, bullet shapes will vary as will bearing surface length, etc. but it should be close to the Woodleigh 350 gr bullet. The data should at least provide a starting point.

One note of caution: I don't know if Barnes used a pressure gun or not when developing the load data for Manual #1. (Many bullet makers did not have access to pressure guns for testing years ago like they do now.) As always, start low and work up. I have not tried any of these loads.

Also, you might to want take at look at the .375 H&H with 350 Gr Bullets thread here on the NitroExpress forums.

-Bob F.





Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* 350 gr. 375 H&H dangerousdave 30/12/04 07:34 AM
. * * Re: 350 gr. 375 H&H BFaucett   31/12/04 03:33 AM
. * * Re: 350 gr. 375 H&H atkinson6   31/12/04 03:38 PM
. * * Re: 350 gr. 375 H&H Will   30/12/04 03:23 PM

Extra information
0 registered and 71 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2756

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved