Home | Ezine | Forums | Links | Contact
NitroExpress.com: Charles Daly O/U

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Shotguns

aromakr
.375 member


Reged: 20/04/11
Posts: 849
Loc: Hamilton, Montana
Re: Charles Daly O/U
      16/04/13 04:53 AM

Gagde;
I've discovered that the problem is the Wisner springs. The problem started after I sold the gun to a good friend of mine, who took it to the local gunsmith to be cleaned. He also suggested the springs be changed and did so with Wisner springs, then the upper barrel started misfiring, three more trips to the gunsmith and it was still misfiring. So I brought the gun home to work on my self. I removed the spring and did a tracing of it, then ordered a new spring also for Wisner. When it arrived I compared it to the removed spring and discovered the new spring was about 1/4 higher.
Put the new spring in place and everything was fine for about 20 shots, then misfiring started again. I removed the new spring and compared it to the old one, the profiles were exactly the same. My conclusion is that Wisner are not heat treating their springs properly, and of course the original springs have been discarded, so I'm at a loss for an answer.
Bob

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Charles Daly O/U aromakr 27/03/13 01:55 AM
. * * Re: Charles Daly O/U granhaven   16/04/13 06:21 AM
. * * Re: Charles Daly O/U aromakr   16/04/13 07:40 AM
. * * Re: Charles Daly O/U granhaven   18/04/13 08:11 PM
. * * Re: Charles Daly O/U jaguarxk120   01/04/13 05:28 AM
. * * Re: Charles Daly O/U Gadge   14/04/13 01:13 PM
. * * Re: Charles Daly O/U aromakr   16/04/13 04:53 AM

Extra information
0 registered and 70 anonymous users are browsing this forum.

Moderator:  NitroX 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 3308

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved