Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Ruger No.1 450 Nitro #2 3 &1/2" ejector problem

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Single Shots & Combination Guns

Ruger_450
Banned

Reged: 10/03/13
Posts: 163
Loc: WY & FL

Re: Ruger No.1 450 Nitro #2 3 &1/2" ejector problem
10/04/13 12:57 PM

IT WORKS !

I dropped one of the 45-70 ejectors into the 450 for a trial fit to see what fitting might be required.
Dropped in a case and raised the lever expecting it to hang up somehwhere on the 450 rim. Nope closed right up with the ejector under the rim. Dropped the lever and it extracted the empty.
So I tightened up the ejector adjustment screw and tried again. A bit more effort to close but chambered with a positive snap. Dropped the hammer, then the lever a ka-ping, the empty was ejected far enough to be clear of the barrel, sitting in the trough. Easy to dump out were a 2nd shot be needed. I could set the ejector spring even tighter to have it clear the gun, but that's not necessary for range shooting and will, of course, make chambering take more effort.
Just scored another 4X wood No.1 in 458 WinMag. Fiddleback end to end ! It's a "black pad" and has the typical open grain from cheap sprayed on finish. That can all be fixed. Now if I could find an original red buttplate, that would be the final touch.:)

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Ruger No.1 450 Nitro #2 3 &1/2" ejector problem	Ruger_450	12/03/13 08:07 AM
Re: Ruger No.1 450 Nitro #2 3 &1/2" ejector problem	bonanza	13/03/13 02:46 AM
Re: Ruger No.1 450 Nitro #2 3 &1/2" ejector problem	DarylS	13/03/13 04:32 AM
Re: Ruger No.1 450 Nitro #2 3 &1/2" ejector problem	tophet1	13/03/13 07:12 AM
Re: Ruger No.1 450 Nitro #2 3 &1/2" ejector problem	AkMike	12/03/13 08:13 AM
Re: Ruger No.1 450 Nitro #2 3 &1/2" ejector problem	tophet1	12/03/13 08:20 AM
Re: Ruger No.1 450 Nitro #2 3 &1/2" ejector problem	Ruger_450	12/03/13 12:32 PM
Re: Ruger No.1 450 Nitro #2 3 &1/2" ejector problem	AkMike	12/03/13 12:50 PM
Re: Ruger No.1 450 Nitro #2 3 &1/2" ejector problem	Ruger_450	13/03/13 02:14 AM
Re: Ruger No.1 450 Nitro #2 3 &1/2" ejector problem	DarylS	13/03/13 02:36 AM
Re: Ruger No.1 450 Nitro #2 3 &1/2" ejector problem	Ruger_450	14/03/13 03:40 AM
Re: Ruger No.1 450 Nitro #2 3 &1/2" ejector problem	DarylS	14/03/13 05:32 AM
Re: Ruger No.1 450 Nitro #2 3 &1/2" ejector problem	Ruger_450	15/03/13 01:23 PM
Re: Ruger No.1 450 Nitro #2 3 &1/2" ejector problem	Ruger_450	16/03/13 12:58 PM
Re: Ruger No.1 450 Nitro #2 3 &1/2" ejector problem	500Nitro	16/03/13 01:07 PM
Re: Ruger No.1 450 Nitro #2 3 &1/2" ejector problem	Ruger_450	17/03/13 11:04 AM
Re: Ruger No.1 450 Nitro #2 3 &1/2" ejector problem	Ruger_450	10/04/13 12:57 PM
Re: Ruger No.1 450 Nitro #2 3 &1/2" ejector problem	CptCurl	10/04/13 08:47 PM

Extra information

0 registered and 151 anonymous users are browsing this forum.

Moderator: Huvius

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 8048

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved