Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Winchester 21 DR in 45-70

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing

Setterguy
.275 member

Reged: 09/06/11
Posts: 78
Loc: Washington, USA

Re: Winchester 21 DR in 45-70
14/03/13 02:24 PM

A little progress.

We have completed the validation process for the top and sides of the receiver and milled out two of them. The bottoms will be done inconjuction with the trigger plate. We EDM wire cut out the first two trigger plates as you will see in the pictures below. However, as it seems is always the case, the computer that starts up the EDM failed and now we must find a replacement. The next step is to EDM wire cut the other plane of the trigger plate. As you will see below they are cut to shape in one plane but not the other-------------yet. We are dead in the water until the EDM is back in operation. I suppose we could mill off the rest but the EDM is so much faster and better. I will just have to wait--------------again.

This is one side of the receiver fully meeting all requirements. No polishing has been done so you see all the tooling marks.

The other side with just a tiny bit of polishing of the tooling.

The trigger plates EDM wire cut from the host block of 4340 steel alloy.

A shot to show the comparison of the planes.

A picture of the trigger plate to show it relationship to the cut out.

Other side of the trigger plate to show perspective.

Hopefully I will be back in action before too long. I will post more when I have them.-----Bill

Edited by CptCurl (20/03/13 10:09 PM)

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Winchester 21 DR in 45-70	Setterguy	14/01/12 11:43 AM
Re: Winchester 21 DR in 45-70	twobobbwana	15/01/14 11:46 AM
Re: Winchester 21 DR in 45-70	Ckhobart	01/02/14 01:03 PM
Re: Winchester 21 DR in 45-70	Setterguy	17/02/14 02:19 PM
Re: Winchester 21 DR in 45-70	twobobbwana	18/02/14 12:24 PM
Re: Winchester 21 DR in 45-70	Setterguy	18/02/14 01:03 PM
Re: Winchester 21 DR in 45-70	Setterguy	20/02/14 02:34 PM
Re: Winchester 21 DR in 45-70	twobobbwana	20/02/14 04:43 PM
Re: Winchester 21 DR in 45-70	Shotgunlover	21/02/14 08:05 AM
Re: Winchester 21 DR in 45-70	Dumprat	23/02/14 03:52 AM
Re: Winchester 21 DR in 45-70	Setterguy	23/02/14 10:59 AM
Re: Winchester 21 DR in 45-70	Dumprat	23/02/14 11:52 AM
Re: Winchester 21 DR in 45-70	twobobbwana	24/02/14 11:47 AM
Re: Winchester 21 DR in 45-70	Ckhobart	13/03/14 05:21 AM
Re: Winchester 21 DR in 45-70	Setterguy	02/05/14 02:54 PM
Re: Winchester 21 DR in 45-70	Setterguy	02/05/14 03:21 PM
Re: Winchester 21 DR in 45-70	Shotgunlover	03/05/14 03:35 AM
Re: Winchester 21 DR in 45-70	Setterguy	03/05/14 07:43 AM
Re: Winchester 21 DR in 45-70	Setterguy	05/05/14 01:10 AM
Re: Winchester 21 DR in 45-70	twobobbwana	20/10/14 12:06 PM
Re: Winchester 21 DR in 45-70	twobobbwana	13/03/15 12:04 PM
Re: Winchester 21 DR in 45-70	CHAPUISARMES	14/03/15 08:27 AM
Re: Winchester 21 DR in 45-70	twobobbwana	01/10/15 11:03 AM
Re: Winchester 21 DR in 45-70	Setterguy	23/12/15 03:20 PM
Re: Winchester 21 DR in 45-70	DarylS	24/12/15 05:19 AM
Re: Winchester 21 DR in 45-70	Setterguy	24/12/15 11:21 AM
Re: Winchester 21 DR in 45-70	twobobbwana	11/01/16 11:51 AM
Re: Winchester 21 DR in 45-70	Setterguy	28/03/16 06:03 AM
Re: Winchester 21 DR in 45-70	Birdhunter50	29/03/16 02:09 AM
Re: Winchester 21 DR in 45-70	Setterguy	29/03/16 06:44 AM
Re: Winchester 21 DR in 45-70	Setterguy	29/03/16 11:13 AM
Re: Winchester 21 DR in 45-70	twobobbwana	29/03/16 11:50 AM
Re: Winchester 21 DR in 45-70	Setterguy	03/04/16 10:23 AM
Re: Winchester 21 DR in 45-70	Waidmannsheil	03/04/16 05:10 PM
Re: Winchester 21 DR in 45-70	4al2	03/04/16 09:26 PM
Re: Winchester 21 DR in 45-70	Setterguy	04/04/16 01:02 AM
Re: Winchester 21 DR in 45-70	Setterguy	09/04/16 11:35 AM
Re: Winchester 21 DR in 45-70	4seventy	14/04/16 04:35 PM
Re: Winchester 21 DR in 45-70	Waidmannsheil	15/04/16 06:32 AM
Re: Winchester 21 DR in 45-70	twobobbwana	06/06/16 10:45 AM
Re: Winchester 21 DR in 45-70	twobobbwana	02/09/16 10:37 AM
Re: Winchester 21 DR in 45-70	twobobbwana	18/11/16 11:31 AM
Re: Winchester 21 DR in 45-70	twobobbwana	31/01/17 11:44 AM
Re: Winchester 21 DR in 45-70	Setterguy	28/04/17 02:27 PM
Re: Winchester 21 DR in 45-70	Setterguy	01/05/17 07:44 AM
Re: Winchester 21 DR in 45-70	twobobbwana	02/05/17 02:41 PM
Re: Winchester 21 DR in 45-70	Setterguy	02/05/17 03:07 PM
Re: Winchester 21 DR in 45-70	CptCurl	03/05/17 09:12 PM
Re: Winchester 21 DR in 45-70	Waidmannsheil	01/05/17 07:00 PM
Re: Winchester 21 DR in 45-70	Setterguy	02/05/17 01:51 PM
Re: Winchester 21 DR in 45-70	Sarg	14/01/12 12:33 PM
Re: Winchester 21 DR in 45-70	tinker	14/01/12 02:22 PM
Re: Winchester 21 DR in 45-70	Setterguy	29/01/12 02:52 PM
Re: Winchester 21 DR in 45-70	Setterguy	30/01/12 02:14 AM
Re: Winchester 21 DR in 45-70	Setterguy	14/01/13 11:09 AM
Re: Winchester 21 DR in 45-70	Setterguy	16/01/13 03:45 PM
Re: Winchester 21 DR in 45-70	Setterguy	14/01/13 11:23 AM
Re: Winchester 21 DR in 45-70	Setterguy	16/01/13 03:50 PM
Re: Winchester 21 DR in 45-70	Setterguy	18/01/13 08:14 AM
Re: Winchester 21 DR in 45-70	TomN	18/01/13 10:16 AM
Re: Winchester 21 DR in 45-70	twobobbwana	18/01/13 12:08 PM
Re: Winchester 21 DR in 45-70	Setterguy	18/01/13 02:57 PM
Re: Winchester 21 DR in 45-70	Birdhunter50	19/01/13 01:13 AM
Re: Winchester 21 DR in 45-70	Setterguy	22/01/13 07:33 AM
Re: Winchester 21 DR in 45-70	Matabele	22/01/13 05:36 PM
Re: Winchester 21 DR in 45-70	AkMike	23/01/13 07:52 AM
Re: Winchester 21 DR in 45-70	twobobbwana	21/02/13 01:07 PM
Re: Winchester 21 DR in 45-70	Setterguy	21/02/13 02:02 PM
Re: Winchester 21 DR in 45-70	Setterguy	22/02/13 04:20 PM
Re: Winchester 21 DR in 45-70	Setterguy	22/02/13 04:25 PM
Re: Winchester 21 DR in 45-70	2152hq	23/02/13 04:42 AM
Re: Winchester 21 DR in 45-70	Setterguy	23/02/13 08:08 AM
Re: Winchester 21 DR in 45-70	2152hq	23/02/13 09:27 AM
Re: Winchester 21 DR in 45-70	Setterguy	05/03/13 02:35 PM
Re: Winchester 21 DR in 45-70	doubleriflejack	07/03/13 08:22 AM
Re: Winchester 21 DR in 45-70	Setterguy	14/03/13 02:06 PM
Re: Winchester 21 DR in 45-70	Setterguy	14/03/13 02:24 PM
Re: Winchester 21 DR in 45-70	twobobbwana	15/03/13 11:58 AM
Re: Winchester 21 DR in 45-70	Setterguy	15/03/13 03:25 PM
Re: Winchester 21 DR in 45-70	twobobbwana	15/03/13 05:11 PM
Re: Winchester 21 DR in 45-70	Setterguy	16/03/13 02:17 AM
Re: Winchester 21 DR in 45-70	aromakr	16/03/13 06:50 AM
Re: Winchester 21 DR in 45-70	Setterguy	16/03/13 08:27 AM
Re: Winchester 21 DR in 45-70	aromakr	16/03/13 10:59 AM
Re: Winchester 21 DR in 45-70	twobobbwana	18/03/13 02:23 PM
Re: Winchester 21 DR in 45-70	twobobbwana	22/04/13 10:42 AM
Re: Winchester 21 DR in 45-70	Setterguy	28/04/13 02:15 PM
Re: Winchester 21 DR in 45-70	twobobbwana	29/04/13 10:42 AM
Re: Winchester 21 DR in 45-70	twobobbwana	13/06/13 01:42 PM
Re: Winchester 21 DR in 45-70	Ckhobart	28/06/13 07:24 AM
Re: Winchester 21 DR in 45-70	Ckhobart	29/07/13 04:09 PM
Re: Winchester 21 DR in 45-70	twobobbwana	09/09/13 03:42 PM
Re: Winchester 21 DR in 45-70	Setterguy	14/01/14 03:48 PM
Re: Winchester 21 DR in 45-70	ad_bfl	07/03/13 03:45 AM
Re: Winchester 21 DR in 45-70	Setterguy	21/02/13 03:17 PM
Re: Winchester 21 DR in 45-70	twobobbwana	21/02/13 02:42 PM
Re: Winchester 21 DR in 45-70	twobobbwana	18/01/13 04:42 PM
Re: Winchester 21 DR in 45-70	DarylS	14/01/13 11:30 AM
Re: Winchester 21 DR in 45-70	twobobbwana	14/01/13 12:00 PM
Re: Winchester 21 DR in 45-70	Matabele	14/01/13 05:15 PM
Re: Winchester 21 DR in 45-70	Setterguy	15/01/13 10:54 AM
Re: Winchester 21 DR in 45-70	Setterguy	16/01/13 09:57 AM
Re: Winchester 21 DR in 45-70	twobobbwana	16/01/13 12:08 PM
Re: Winchester 21 DR in 45-70	DarylS	15/01/12 05:42 AM
Re: Winchester 21 DR in 45-70	Setterguy	16/01/12 02:18 PM

Extra information

0 registered and 4 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 52374

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved