Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: 7mm bore diameter USA - Europe

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

Tom30887
.275 member

Reged: 01/07/12
Posts: 78
Loc: QLD

Re: 7mm bore diameter USA - Europe
10/03/13 10:48 AM

First up, I'm not sure if their is 2 different standards from continent to continent.

But.....The groove Dia. of a barrel is not a critical dimension. Depending on the number of grooves/lands and the width of them a 7mm barrel could have a groove Dia of anything from .280" right through to 0.290".

The bore is far more critical when it comes to Pressure/velocity and the bore dia is more strictly maintained and quality assessed. Even said, the one thou difference you mentioned is a fair (not good, but acceptable) tolerance when it comes to a bore Dia.
Most factory produced guns bore sizes could easily have a +/- 0.0005" tolerance. Your higher custom barrel makers could hold a +/- 0.00025" tolerance (0.0005" {1/2 Thou} maximum variation).

The point I am making is that I find it hard to believe different continents would have different std specks on barrel dimensions when their is no doubt their sizes would be over lapping anyway from barrel maker to barrel maker.

It should also be noted that it wouldn't really matter at all when it comes to accuracy. A tight bore will result in higher pressures but you have to play around a fair bit to get a 'dangerously high pressure', for example tight 30 cal bores can measure 0.2965" and military bores can measure 0.302" (that's over 0.005" difference and both obviously work).

Hope this gives a little insight.

Tom.

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
7mm bore diameter USA - Europe	fourbore	10/03/13 12:10 AM
Re: 7mm bore diameter USA - Europe	grandveneur	10/03/13 07:46 PM
Re: 7mm bore diameter USA - Europe	fourbore	10/03/13 09:28 PM
Re: 7mm bore diameter USA - Europe	xausa	11/03/13 03:09 PM
Re: 7mm bore diameter USA - Europe	fourbore	12/03/13 11:56 PM
Re: 7mm bore diameter USA - Europe	Rolf	06/05/13 09:37 PM
Re: 7mm bore diameter USA - Europe	tophet1	10/03/13 07:50 AM
Re: 7mm bore diameter USA - Europe	fourbore	10/03/13 08:48 AM
Re: 7mm bore diameter USA - Europe	tophet1	10/03/13 09:08 AM
Re: 7mm bore diameter USA - Europe	Tom30887	10/03/13 10:48 AM
Re: 7mm bore diameter USA - Europe	John303	10/03/13 12:30 PM
Re: 7mm bore diameter USA - Europe	VonGruff	10/03/13 03:32 PM

Extra information

0 registered and 47 anonymous users are browsing this forum.

Moderator:

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 4882

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved