Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Mannlicher steel rotary mag

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

twobobbwana
.333 member

Reged: 25/11/11
Posts: 299
Loc: Queensland, Australia

Re: Mannlicher steel rotary mag
05/03/13 02:38 PM

Adam,

I once did work on a 1903 Greek that had been partially converted to .257 Roberts.

Someone had rebarrelled it and restocked it but had done absolutely no work to get a cartridge in the magazine nor to get it to feed.

I had a later commercial MS .270 magazine available which didn't (?) have the fins between the cartridge bodies. So I removed them from the 1903 mag. I left the "cartrige pushing paddle" on the spool of course......... and the fins on the neck section (?).

Then I increased the diameter of the radius inside the magazine where the case head rotates (as the magazine is filled/emptied) to suit the new case head size and made and fitted the "wings" that support/guide the shoulder area of the case.

It was then a case to "spot" in the cartridge to fit between the feed rails of the action. Then it would allow you to feed the magazine through the top of the action and to empty the magazine when you pushed the "little button".

More "spotting" eventually allowed the cartridge to feed from the magazine into the chamber.

Eventually the thing fed just like a Mannlicher.

If my memory is hazy on this it's because it's been a while since I did this job and the alcohol that I drank to forget it must have been effective.

The things you do for mates !!!!.

If I had an original MS takeoff mount, double set triggers, a good donor rifle, along with an appropriately contoured stock I may well attempt this again........supposing I had alot of other projects done.

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Mannlicher steel rotary mag	ozhunter	28/12/08 09:45 AM
Re: Mannlicher steel rotary mag	GG375	28/12/08 10:47 AM
Re: Mannlicher steel rotary mag	TilleyMan	10/02/09 12:26 PM
Re: Mannlicher steel rotary mag	GG375	10/02/09 01:21 PM
Re: Mannlicher steel rotary mag	TilleyMan	10/02/09 01:42 PM
Re: Mannlicher steel rotary mag	Mike_Bailey	10/02/09 06:54 PM
Re: Mannlicher steel rotary mag	Clark	10/02/09 09:12 PM
Re: Mannlicher steel rotary mag	Marrakai	14/02/09 07:36 PM
Re: Mannlicher steel rotary mag	Clark	17/02/09 12:41 AM
Re: Mannlicher steel rotary mag	DuggaBoy	04/03/09 06:19 AM
Re: Mannlicher steel rotary mag	brosteve	01/03/13 01:38 PM
Re: Mannlicher steel rotary mag	twobobbwana	05/03/13 02:38 PM
Re: Mannlicher steel rotary mag	brosteve	05/03/13 02:56 PM
Re: Mannlicher steel rotary mag	kuduae	06/03/13 05:11 AM
Re: Mannlicher steel rotary mag	twobobbwana	06/03/13 12:30 PM
Re: Mannlicher steel rotary mag	TilleyMan	15/02/09 04:08 PM

Extra information

1 registered and 191 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 10492

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved