Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Krieghoff Trumpf 16x16x8jrs

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Single Shots & Combination Guns

DonT
.224 member

Reged: 16/05/12
Posts: 33
Loc: Minnesota

Re: Krieghoff Trumpf 16x16x8jrs
14/02/13 02:08 PM

As requested here are the photos (see bottom of the post).... .

Note on the modified ring I had to remove the spring that pushes the locking plate (under the lever) open so the plate would close tight enough to remove all play. Before folks start asking why I put the shim on one side it is because when I put 020 shim on each side and bore sighted it I had to use all the scope adjustment to get it lined up. By moving a larger shim to one side it put it dead on with the adjustments centered. I suggest if you are going to do this to make up a few shims and try bore sighting and adjust accordingly before soldering. The rings craddle the scope just fine so and don't appear to tweak the scope so the bases must be off just a smidgeon (that is a technical machinist term.. .LOL).

With the cold weather I am not going to be able to get out and test if for a few weeks but will post when I do.

Finally I did not put a recoil stop in the rings cause I want them to easily slide on and off from the back of the gun sliding it forward then locking in place with the locking levers. I don't think the 8x57jrs load should cause it move but we will see...

Thanks for looking...
DonT

Rifle with scope mounted.

Brass shim mounted to the rings (about .060)soldered in place.

Other side of the Rifle with scope mounted with QD levers.

View of the modified ring base from end.

Edited by CptCurl (27/02/13 11:14 PM)

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Krieghoff Trumpf 16x16x8jrs	DonT	01/02/13 02:08 AM
Re: Krieghoff Trumpf 16x16x8jrs	brosteve	01/02/13 03:09 PM
Re: Krieghoff Trumpf 16x16x8jrs	brosteve	01/02/13 03:13 PM
Re: Krieghoff Trumpf 16x16x8jrs	DonT	02/02/13 03:56 AM
Re: Krieghoff Trumpf 16x16x8jrs	brosteve	04/02/13 12:25 PM
Re: Krieghoff Trumpf 16x16x8jrs	DonT	05/02/13 08:02 AM
Re: Krieghoff Trumpf 16x16x8jrs	DonT	12/02/13 08:07 AM
Re: Krieghoff Trumpf 16x16x8jrs	brosteve	13/02/13 03:17 PM
Re: Krieghoff Trumpf 16x16x8jrs	DonT	14/02/13 02:08 PM
Re: Krieghoff Trumpf 16x16x8jrs	xausa	20/03/13 12:58 PM
Re: Krieghoff Trumpf 16x16x8jrs	DonT	21/03/13 03:00 AM
Re: Krieghoff Trumpf 16x16x8jrs	brosteve	16/02/13 03:40 PM
Re: Krieghoff Trumpf 16x16x8jrs	SAHUNT	16/02/13 10:22 PM
Re: Krieghoff Trumpf 16x16x8jrs	DonT	18/02/13 04:36 AM
Re: Krieghoff Trumpf 16x16x8jrs	xausa	18/02/13 07:27 AM
Re: Krieghoff Trumpf 16x16x8jrs	brosteve	21/02/13 09:26 AM
Re: Krieghoff Trumpf 16x16x8jrs	DonT	22/02/13 06:23 AM

Extra information

1 registered and 47 anonymous users are browsing this forum.

Moderator: Huvius

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 9310

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved