Home | Ezine | Forums | Links | Contact
NitroExpress.com: M1905 carbine

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

JDL
.333 member


Reged: 25/12/10
Posts: 252
Loc: Louisiana
Re: M1905 carbine
      14/02/13 06:32 AM

Congratulations on a fine rifle! I had a rather unnerving incident with a Lyman #36 on my 1908. I was shooting it at the range one day and decided to swing the small peep out to see if the larger peep would affect my shooting. When I got home and started to clean it, the swing out peep was gone!! The screw that holds it in place, that acts as a pivot, had loosened and the peep had fallen out. I searched through my case, range bag, in the house, and even outside trying to find it without success. I called the range master to see if he could find it and still no success. Next day I went back to the range and found it by the bench.:-)
Moral to this long-winded story is keep the pivot screw tight or the spring driven sight will pop it right out!

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* M1905 carbine vagrouser 08/02/13 02:29 PM
. * * Re: M1905 carbine Clark   08/02/13 09:55 PM
. * * Re: M1905 carbine lancaster   08/02/13 09:58 PM
. * * Re: M1905 carbine xausa   09/02/13 12:13 AM
. * * Re: M1905 carbine JDL   14/02/13 06:32 AM
. * * Re: M1905 carbine vagrouser   14/02/13 04:44 PM

Extra information
0 registered and 175 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 3878

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved